From: David Brownell <[EMAIL PROTECTED]>
More switchover to the cross-platform GPIO interface:
use gpio_direction_input(), not an OMAP-specific call.
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
---
arch/arm/mach-omap1/board-palmte.c | 4 ++--
arch/arm/mach-omap1/board-palmz71.c | 4 ++--
arch/arm/mach-omap1/board-voiceblue.c | 2 +-
arch/arm/mach-omap1/fpga.c | 2 +-
arch/arm/mach-omap1/serial.c | 2 +-
arch/arm/mach-omap2/board-2430sdp.c | 2 +-
arch/arm/mach-omap2/board-apollon.c | 2 +-
arch/arm/mach-omap2/usb-tusb6010.c | 2 +-
arch/arm/plat-omap/debug-devices.c | 2 +-
drivers/mtd/onenand/omap2.c | 2 +-
drivers/usb/host/ohci-omap.c | 2 +-
11 files changed, 13 insertions(+), 13 deletions(-)
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -373,14 +373,14 @@ static void __init palmte_misc_gpio_setu
printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");
return;
}
- omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1);
+ gpio_direction_input(PALMTE_PINTDAV_GPIO);
/* Set USB-or-DC-IN pin as input (unused) */
if (omap_request_gpio(PALMTE_USB_OR_DC_GPIO)) {
printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
return;
}
- omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1);
+ gpio_direction_input(PALMTE_USB_OR_DC_GPIO);
}
static void __init omap_palmte_init(void)
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -320,7 +320,7 @@ palmz71_gpio_setup(int early)
printk(KERN_ERR "Could not reserve WP GPIO!\n");
return;
}
- omap_set_gpio_direction(PALMZ71_MMC_WP_GPIO, 1);
+ gpio_direction_input(PALMZ71_MMC_WP_GPIO);
/* Monitor the Power-cable-connected signal */
if (omap_request_gpio(PALMZ71_USBDETECT_GPIO)) {
@@ -328,7 +328,7 @@ palmz71_gpio_setup(int early)
"Could not reserve cable signal GPIO!\n");
return;
}
- omap_set_gpio_direction(PALMZ71_USBDETECT_GPIO, 1);
+ gpio_direction_input(PALMZ71_USBDETECT_GPIO);
if (request_irq(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
palmz71_powercable, IRQF_SAMPLE_RANDOM,
"palmz71-cable", 0))
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -248,7 +248,7 @@ void voiceblue_wdt_disable(void)
gpio_set_value(0, 0);
gpio_set_value(0, 1);
gpio_set_value(0, 0);
- omap_set_gpio_direction(0, 1);
+ gpio_direction_input(0);
}
void voiceblue_wdt_ping(void)
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -178,7 +178,7 @@ void omap1510_fpga_init_irq(void)
* gpio.[ch]
*/
omap_request_gpio(13);
- omap_set_gpio_direction(13, 1);
+ gpio_direction_input(13);
set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
}
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -250,7 +250,7 @@ static void __init omap_serial_set_port_
gpio_nr);
return;
}
- omap_set_gpio_direction(gpio_nr, 1);
+ gpio_direction_input(gpio_nr);
ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt,
IRQF_TRIGGER_RISING, "serial wakeup", NULL);
if (ret) {
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -313,7 +313,7 @@ static inline void __init sdp2430_init_s
gpmc_cs_free(eth_cs);
goto out;
}
- omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
+ gpio_direction_input(OMAP24XX_ETHR_GPIO_IRQ);
out:
clk_disable(gpmc_fck);
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -401,7 +401,7 @@ static void __init apollon_tsc_init(void
/* TSC2101 */
omap_cfg_reg(N15_24XX_GPIO85);
omap_request_gpio(85);
- omap_set_gpio_direction(85, 1);
+ gpio_direction_input(85);
omap_cfg_reg(W14_24XX_SYS_CLKOUT); /* mclk */
}
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -295,7 +295,7 @@ tusb6010_setup_interface(struct musb_hdr
printk(error, 3, status);
return status;
}
- omap_set_gpio_direction(irq, 1);
+ gpio_direction_input(irq);
tusb_resources[2].start = irq + IH_GPIO_BASE;
/* set up memory timings ... can speed them up later */
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -77,7 +77,7 @@ int __init debug_card_init(u32 addr, uns
printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio);
return status;
}
- omap_set_gpio_direction(gpio, 1);
+ gpio_direction_input(gpio);
led_resources[0].start = addr;
led_resources[0].end = addr + SZ_4K - 1;
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -635,7 +635,7 @@ static int __devinit omap2_onenand_probe
"OneNAND\n", c->gpio_irq);
goto err_iounmap;
}
- omap_set_gpio_direction(c->gpio_irq, 1);
+ gpio_direction_input(c->gpio_irq);
if ((r = request_irq(OMAP_GPIO_IRQ(c->gpio_irq),
omap2_onenand_interrupt, IRQF_TRIGGER_RISING,
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -255,7 +255,7 @@ static int ohci_omap_init(struct usb_hcd
/* gpio9 for overcurrent detction */
omap_cfg_reg(W8_1610_GPIO9);
omap_request_gpio(9);
- omap_set_gpio_direction(9, 1 /* IN */);
+ gpio_direction_input(9);
/* for paranoia's sake: disable USB.PUEN */
omap_cfg_reg(W4_USB_HIGHZ);
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
