Currently qh list for control, bulkin and bulkout are
part of musb structure as musb->control, musb->in_bulk
and musb->out_bulk.This patch makes it generic across
hw_ep by removing them from musb and mapping them to
in_list and out_list of hw_ep structure.
Signed-off-by: Ravi Babu <[EMAIL PROTECTED]>
Signed-off-by: Swaminathan S <[EMAIL PROTECTED]>
Signed-off-by: Thomas Abraham <[EMAIL PROTECTED]>
Signed-off-by: Ajay Kumar Gupta <[EMAIL PROTECTED]>
---
drivers/usb/musb/musb_core.c | 6 +++---
drivers/usb/musb/musb_core.h | 7 ++++---
drivers/usb/musb/musb_host.c | 36 ++++++++++++++++++------------------
3 files changed, 25 insertions(+), 24 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index ebe0828..dbf8861 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1445,6 +1445,9 @@ static int __init musb_core_init(u16 musb_type, struct
musb *musb)
hw_ep->regs = MUSB_EP_OFFSET(i, 0) + mbase;
#ifdef CONFIG_USB_MUSB_HDRC_HCD
+ /* init list of in and out qhs */
+ INIT_LIST_HEAD(&hw_ep->in_list);
+ INIT_LIST_HEAD(&hw_ep->out_list);
hw_ep->target_regs = MUSB_BUSCTL_OFFSET(i, 0) + mbase;
hw_ep->rx_reinit = 1;
hw_ep->tx_reinit = 1;
@@ -1790,9 +1793,6 @@ allocate_instance(struct device *dev,
/* usbcore sets dev->driver_data to hcd, and sometimes uses that... */
musb = hcd_to_musb(hcd);
- INIT_LIST_HEAD(&musb->control);
- INIT_LIST_HEAD(&musb->in_bulk);
- INIT_LIST_HEAD(&musb->out_bulk);
hcd->uses_new_polling = 1;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 4972a3b..27cd1e3 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -271,6 +271,10 @@ struct musb_hw_ep {
struct musb_qh *in_qh;
struct musb_qh *out_qh;
+ /* list of rx and tx qhs */
+ struct list_head in_list;
+ struct list_head out_list;
+
u8 rx_reinit;
u8 tx_reinit;
#endif
@@ -328,9 +332,6 @@ struct musb {
*/
struct musb_hw_ep *bulk_ep;
- struct list_head control; /* of musb_qh */
- struct list_head in_bulk; /* of musb_qh */
- struct list_head out_bulk; /* of musb_qh */
struct musb_qh *in[16];
struct musb_qh *out[16];
#endif
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index b77ca0b..014401c 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1223,7 +1223,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
* transfer, if there's some other (nonperiodic) tx urb
* that could use this fifo. (dma complicates it...)
*
- * if (bulk && qh->ring.next != &musb->out_bulk), then
+ * if (bulk && qh->ring.next != &hw_ep->out_list), then
* we have a candidate... NAKing is *NOT* an error
*/
musb_ep_select(mbase, epnum);
@@ -1449,13 +1449,13 @@ void musb_host_rx(struct musb *musb, u8 epnum)
* transfer, if there's some other (nonperiodic) rx urb
* that could use this fifo. (dma complicates it...)
*
- * if (bulk && qh->ring.next != &musb->in_bulk), then
+ * if (bulk && qh->ring.next != &hw_wp->in_list), then
* we have a candidate... NAKing is *NOT* an error
*/
DBG(6, "RX end %d NAK timeout\n", epnum);
if (usb_pipebulk(urb->pipe) && qh->mux == 1 &&
- (musb->in_bulk.next->next != &musb->in_bulk) &&
- bulk_nak_timeout) {
+ (hw_ep->in_list.next->next != &hw_ep->in_list)
+ && bulk_nak_timeout) {
musb_bulk_nak_timeout(musb, hw_ep);
return;
}
@@ -1744,8 +1744,8 @@ static int musb_schedule(
/* use fixed hardware for control and bulk */
if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
- head = &musb->control;
hw_ep = musb->control_ep;
+ head = &hw_ep->in_list;
goto success;
}
@@ -1801,9 +1801,9 @@ static int musb_schedule(
if (best_end > 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
hw_ep = musb->bulk_ep;
if (is_in)
- head = &musb->in_bulk;
+ head = &hw_ep->in_list;
else
- head = &musb->out_bulk;
+ head = &hw_ep->out_list;
goto success;
} else if (best_end < 0) {
return -ENOSPC;
@@ -2101,14 +2101,14 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct
urb *urb, int status)
else {
switch (qh->type) {
case USB_ENDPOINT_XFER_CONTROL:
- sched = &musb->control;
+ sched = &musb->control_ep->in_list;
break;
case USB_ENDPOINT_XFER_BULK:
if (qh->mux == 1) {
if (usb_pipein(urb->pipe))
- sched = &musb->in_bulk;
+ sched = &musb->bulk_ep->in_list;
else
- sched = &musb->out_bulk;
+ sched = &musb->bulk_ep->out_list;
break;
}
default:
@@ -2172,14 +2172,14 @@ musb_h_disable(struct usb_hcd *hcd, struct
usb_host_endpoint *hep)
switch (qh->type) {
case USB_ENDPOINT_XFER_CONTROL:
- sched = &musb->control;
+ sched = &musb->control_ep->in_list;
break;
case USB_ENDPOINT_XFER_BULK:
if (qh->mux == 1) {
if (is_in)
- sched = &musb->in_bulk;
+ sched = &musb->bulk_ep->in_list;
else
- sched = &musb->out_bulk;
+ sched = &musb->bulk_ep->out_list;
break;
}
case USB_ENDPOINT_XFER_ISOC:
@@ -2305,7 +2305,7 @@ static void musb_bulk_nak_timeout(struct musb *musb,
struct musb_hw_ep *ep)
rx_csr &= ~MUSB_RXCSR_DATAERROR;
musb_writew(epio, MUSB_RXCSR, rx_csr);
- cur_qh = first_qh(&musb->in_bulk);
+ cur_qh = first_qh(&ep->in_list);
if (cur_qh) {
urb = next_urb(cur_qh);
if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
@@ -2316,12 +2316,12 @@ static void musb_bulk_nak_timeout(struct musb *musb,
struct musb_hw_ep *ep)
}
musb_save_toggle(ep, 1, urb);
- /* delete cur_qh and add to tail to musb->in_bulk */
+ /* delete cur_qh and add to tail of ep->in_list */
list_del(&cur_qh->ring);
- list_add_tail(&cur_qh->ring, &musb->in_bulk);
+ list_add_tail(&cur_qh->ring, &ep->in_list);
- /* get the next qh from musb->in_bulk */
- next_qh = first_qh(&musb->in_bulk);
+ /* get the next qh from ep->in_list */
+ next_qh = first_qh(&ep->in_list);
/* set rx_reinit and schedule the next qh */
ep->rx_reinit = 1;
--
1.5.6
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
