Op 4 nov 2008, om 17:10 heeft Tomi Valkeinen het volgende geschreven:
Signed-off-by: Tomi Valkeinen <[EMAIL PROTECTED]> ---arch/arm/mach-omap2/board-omap3beagle.c | 121 ++++++++++++++++++++++ ++++++---1 files changed, 108 insertions(+), 13 deletions(-) +static struct omap_display_data beagle_display_data_dvi = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "dvi", + .panel_name = "panel-dvi", + .u.dpi.data_lines = 24, + .panel_reset_gpio = 170, + .panel_enable = beagle_enable_dvi, + .panel_disable = beagle_disable_dvi,
gpio 170 is the enable (or disable, I forget which) for the DVI framer (TFP410), not a reset gpio. It would be nice to have a way to enable/ disable the framer from userspace since it burns 60-100mA.
regards, Koen
PGP.sig
Description: This is a digitally signed message part
