On Wednesday 05 November 2008, Jarkko Nikula wrote:
> > + r = gpio_request(beagle_display_data_dvi.panel_reset_gpio, "DVI reset
> > GPIO");
> > + if(r < 0) {
>
> GPIO label "DVI reset" is enough.
Surely this ** doesn't work ** at least against the OMAP git tree
which already has:
omap_cfg_reg(J25_34XX_GPIO170);
gpio_request(170, "DVI_nPD");
/* REVISIT leave DVI powered down until it's needed ... */
gpio_direction_output(170, true);
Label matches the DVI chip, not board schematics. Agreed,
it's not a reset.
I'd like to see any FB/DSS/... updates have the property that
the TFP410 chip is powered down *unless* both (a) the frame
buffer/DSS/... driver is active, and (b) the DVI channel is
in use.
So for example a kernel without FB/DSS/... configured, that
DVI chip is never powered up. And when only the S-Video channel
is used, DVI isn't powered up either.
- Dave
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
