From: Felipe Balbi <[EMAIL PROTECTED]>
Trivial fix making mmc build for omap1 boards.
Signed-off-by: Felipe Balbi <[EMAIL PROTECTED]>
---
arch/arm/mach-omap1/board-innovator.c | 2 +-
arch/arm/mach-omap1/devices.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap1/board-innovator.c
b/arch/arm/mach-omap1/board-innovator.c
index 7a97f6b..feaf616 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -385,7 +385,7 @@ static struct omap_mmc_platform_data mmc1_data = {
.nr_slots = 1,
.slots[0] = {
.set_power = mmc_set_power,
- .wire4 = 1,
+ .wires = 4,
.name = "mmcblk",
},
};
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 45712a5..e8ff6b5 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -116,7 +116,7 @@ static inline void omap1_mmc_mux(struct
omap_mmc_platform_data *mmc_controller,
omap_cfg_reg(P19_1710_MMC_CMDDIR);
omap_cfg_reg(P20_1710_MMC_DATDIR0);
}
- if (mmc_controller->slots[0].wire4) {
+ if (mmc_controller->slots[0].wires == 4) {
omap_cfg_reg(MMC_DAT1);
/* NOTE: DAT2 can be on W10 (here) or M15 */
if (!mmc_controller->slots[0].nomux)
@@ -132,7 +132,7 @@ static inline void omap1_mmc_mux(struct
omap_mmc_platform_data *mmc_controller,
omap_cfg_reg(Y10_1610_MMC2_CLK);
omap_cfg_reg(R18_1610_MMC2_CLKIN);
omap_cfg_reg(W8_1610_MMC2_DAT0);
- if (mmc_controller->slots[1].wire4) {
+ if (mmc_controller->slots[1].wires == 4) {
omap_cfg_reg(V8_1610_MMC2_DAT1);
omap_cfg_reg(W15_1610_MMC2_DAT2);
omap_cfg_reg(R10_1610_MMC2_DAT3);
--
1.6.0.2.307.gc427
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
