I know that Beagle and Overo get the same warnings, so this
isn't really a sufficient fix...
On Wednesday 19 November 2008, Sanjeev Premi wrote:
> --- a/arch/arm/mach-omap2/board-omap3evm.c
> +++ b/arch/arm/mach-omap2/board-omap3evm.c
> @@ -130,7 +130,7 @@ static struct twl4030_madc_platform_data
> omap3evm_madc_data = {
> .irq_line = 1,
> };
>
> -static struct twl4030_platform_data omap3evm_twldata = {
> +static struct twl4030_platform_data __initdata omap3evm_twldata = {
... and that's incorrect in any case, since that data is used
by probe() code that's doesn't sit in an init section.
I have the following in my patchset, currently disabled since
it conflicts with other patches. And in any case, Beagle can't
reboot with these "generic" scripts for some TBD reason.
- Dave
================= CUT HERE
---
arch/arm/mach-omap2/board-omap3beagle.c | 2 +-
arch/arm/mach-omap2/board-omap3evm.c | 2 +-
arch/arm/mach-omap2/board-overo.c | 2 +-
arch/arm/mach-omap2/twl4030-generic-scripts.c | 3 +++
arch/arm/mach-omap2/twl4030-generic-scripts.h | 5 +++++
5 files changed, 11 insertions(+), 3 deletions(-)
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -188,7 +188,7 @@ static struct twl4030_platform_data beag
/* platform_data for children goes here */
.usb = &beagle_usb_data,
.gpio = &beagle_gpio_data,
- .power = &generic3430_t2scripts_data,
+ .power = GENERIC3430_T2SCRIPTS_DATA,
};
static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -140,7 +140,7 @@ static struct twl4030_platform_data omap
.keypad = &omap3evm_kp_data,
.madc = &omap3evm_madc_data,
.usb = &omap3evm_usb_data,
- .power = &generic3430_t2scripts_data,
+ .power = GENERIC3430_T2SCRIPTS_DATA,
.gpio = &omap3evm_gpio_data,
};
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -162,7 +162,7 @@ static struct twl4030_platform_data over
.irq_end = TWL4030_IRQ_END,
.gpio = &overo_gpio_data,
.usb = &overo_usb_data,
- .power = &generic3430_t2scripts_data,
+ .power = GENERIC3430_T2SCRIPTS_DATA,
};
static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
--- a/arch/arm/mach-omap2/twl4030-generic-scripts.c
+++ b/arch/arm/mach-omap2/twl4030-generic-scripts.c
@@ -23,6 +23,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#ifdef CONFIG_TWL4030_POWER
+
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/init.h>
@@ -76,3 +78,4 @@ struct twl4030_power_data generic3430_t2
};
+#endif /* CONFIG_TWL4030_POWER */
--- a/arch/arm/mach-omap2/twl4030-generic-scripts.h
+++ b/arch/arm/mach-omap2/twl4030-generic-scripts.h
@@ -3,6 +3,11 @@
#include <linux/i2c/twl4030.h>
+#ifdef CONFIG_TWL4030_POWER
extern struct twl4030_power_data generic3430_t2scripts_data;
+#define GENERIC3430_T2SCRIPTS_DATA &generic3430_t2scripts_data
+#else
+#define GENERIC3430_T2SCRIPTS_DATA NULL
+#endif /* CONFIG_TWL4030_POWER */
#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
