From: David Brownell <[EMAIL PROTECTED]>
Disable the TWL4030_PWRIRQ_PWRBTN symbol from the system headers;
initialization of the power button handler still needs work, so
an equivalent symbol is defined in its driver.
Power IRQs now properly handle trigger specs from request_irq();
stop goofing with registers reserved to the IRQ infrastructure.
Minor cleanup: switch several messages to pr_debug().
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
---
drivers/i2c/chips/twl4030-pwrbutton.c | 50 ++++++++------------------------
include/linux/i2c/twl4030.h | 2 -
2 files changed, 15 insertions(+), 37 deletions(-)
--- a/drivers/i2c/chips/twl4030-pwrbutton.c
+++ b/drivers/i2c/chips/twl4030-pwrbutton.c
@@ -29,18 +29,16 @@
#include <linux/interrupt.h>
#include <linux/i2c/twl4030.h>
-#define PWR_ISR1 0
-#define PWR_IMR1 1
+
#define PWR_PWRON_IRQ (1<<0)
-#define PWR_EDR1 5
-#define PWR_PWRON_RISING (1<<1)
-#define PWR_PWRON_FALLING (1<<0)
-#define PWR_PWRON_BOTH (PWR_PWRON_RISING | PWR_PWRON_FALLING)
+#define STS_HW_CONDITIONS 0xf
-#define PWR_SIH_CTRL 7
-#define STS_HW_CONDITIONS 0xf
+/* FIXME have this constant delivered to us as part of the
+ * twl4030-core setup ...
+ */
+#define TWL4030_PWRIRQ_PWRBTN (TWL4030_PWR_IRQ_BASE + 0)
static struct input_dev *powerbutton_dev;
@@ -73,20 +71,19 @@ static irqreturn_t powerbutton_irq(int i
static int __init twl4030_pwrbutton_init(void)
{
int err = 0;
- u8 value;
/* PWRBTN == PWRON */
- if (request_irq(TWL4030_PWRIRQ_PWRBTN, powerbutton_irq, 0,
- "PwrButton", NULL) < 0) {
- printk(KERN_ERR "Unable to allocate IRQ for power button\n");
- err = -EBUSY;
+ err = request_irq(TWL4030_PWRIRQ_PWRBTN, powerbutton_irq,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "PwrButton", NULL);
+ if (err < 0) {
+ pr_debug("Can't get IRQ for power button: %d\n", err);
goto out;
}
powerbutton_dev = input_allocate_device();
if (!powerbutton_dev) {
- printk(KERN_ERR
- "Unable to allocate input device for power button\n");
+ pr_debug("Can't allocate power button\n");
err = -ENOMEM;
goto free_irq_and_out;
}
@@ -97,26 +94,7 @@ static int __init twl4030_pwrbutton_init
err = input_register_device(powerbutton_dev);
if (err) {
- input_free_device(powerbutton_dev);
- goto free_irq_and_out;
- }
-
- /* FIXME just pass IRQF_EDGE_FALLING | IRQF_EDGE_RISING
- * to request_irq(), once MODULE_INT supports them...
- */
- err = twl4030_i2c_read_u8(TWL4030_MODULE_INT, &value, PWR_EDR1);
- if (err) {
- printk(KERN_WARNING "I2C error %d while reading TWL4030"
- " INT PWR_EDR1 register\n", err);
- goto free_input_dev;
- }
-
- err = twl4030_i2c_write_u8(TWL4030_MODULE_INT,
- value | PWR_PWRON_BOTH, PWR_EDR1);
-
- if (err) {
- printk(KERN_WARNING "I2C error %d while writing TWL4030"
- " INT PWR_EDR1 register\n", err);
+ pr_debug("Can't register power button: %d\n", err);
goto free_input_dev;
}
@@ -126,7 +104,7 @@ static int __init twl4030_pwrbutton_init
free_input_dev:
- input_unregister_device(powerbutton_dev);
+ input_free_device(powerbutton_dev);
free_irq_and_out:
free_irq(TWL4030_PWRIRQ_PWRBTN, NULL);
out:
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -379,7 +379,7 @@ int twl4030_sih_setup(int module);
/* #define TWL4030_MODIRQ_USB (TWL4030_IRQ_BASE + 4) */
/* #define TWL4030_MODIRQ_PWR (TWL4030_IRQ_BASE + 5) */
-#define TWL4030_PWRIRQ_PWRBTN (TWL4030_PWR_IRQ_BASE + 0)
+/* #define TWL4030_PWRIRQ_PWRBTN (TWL4030_PWR_IRQ_BASE + 0) */
/* #define TWL4030_PWRIRQ_CHG_PRES (TWL4030_PWR_IRQ_BASE + 1) */
/* #define TWL4030_PWRIRQ_USB_PRES (TWL4030_PWR_IRQ_BASE + 2) */
/* #define TWL4030_PWRIRQ_RTC (TWL4030_PWR_IRQ_BASE + 3) */
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
