[PATCHv2 1/3] OMAP: Switch to standard gpio interface in OMAP_LDP

[Stanley.Miao]

Switch to standard gpio interface and make LDP can build success.

Signed-off-by: Stanley.Miao <[EMAIL PROTECTED]>
---
 arch/arm/mach-omap2/board-ldp.c |    4 ++--
 drivers/video/omap/lcd_ldp.c    |   16 +++++++---------
 2 files changed, 9 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 103ce6d..cfa2cde 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -344,12 +344,12 @@ static inline void __init ldp_init_smc911x(void)
 
        ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
 
-       if (omap_request_gpio(eth_gpio) < 0) {
+       if (gpio_request(eth_gpio, "LAN IRQ line") < 0) {
                printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
                                eth_gpio);
                return;
        }
-       omap_set_gpio_direction(eth_gpio, 1);
+       gpio_direction_input(eth_gpio);
 }
 
 
diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c
index e944166..66a6b91 100644
--- a/drivers/video/omap/lcd_ldp.c
+++ b/drivers/video/omap/lcd_ldp.c
@@ -64,30 +64,28 @@
 static int ldp_panel_init(struct lcd_panel *panel,
                                struct omapfb_device *fbdev)
 {
-       omap_request_gpio(LCD_PANEL_RESET_GPIO);
-       omap_request_gpio(LCD_PANEL_QVGA_GPIO);
+       gpio_request(LCD_PANEL_RESET_GPIO, "lcd reset");
+       gpio_request(LCD_PANEL_QVGA_GPIO, "VGA/QVGA switch");
        gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd panel");
        gpio_request(LCD_PANEL_BACKLIGHT_GPIO, "lcd backlight");
 
-       omap_set_gpio_direction(LCD_PANEL_QVGA_GPIO, 0);
-       omap_set_gpio_direction(LCD_PANEL_RESET_GPIO, 0);
        gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
        gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 0);
 
 #ifdef CONFIG_FB_OMAP_LCD_VGA
-       omap_set_gpio_dataout(LCD_PANEL_QVGA_GPIO, 0);
+       gpio_direction_output(LCD_PANEL_QVGA_GPIO, 0);
 #else
-       omap_set_gpio_dataout(LCD_PANEL_QVGA_GPIO, 1);
+       gpio_direction_output(LCD_PANEL_QVGA_GPIO, 1);
 #endif
-       omap_set_gpio_dataout(LCD_PANEL_RESET_GPIO, 1);
+       gpio_direction_output(LCD_PANEL_RESET_GPIO, 1);
 
        return 0;
 }
 
 static void ldp_panel_cleanup(struct lcd_panel *panel)
 {
-       omap_free_gpio(LCD_PANEL_RESET_GPIO);
-       omap_free_gpio(LCD_PANEL_QVGA_GPIO);
+       gpio_free(LCD_PANEL_RESET_GPIO);
+       gpio_free(LCD_PANEL_QVGA_GPIO);
        gpio_free(LCD_PANEL_ENABLE_GPIO);
        gpio_free(LCD_PANEL_BACKLIGHT_GPIO);
 }
-- 
1.5.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html