Shortly: Restate the introductory header and resend the patches?
On Mon, 2008-11-24 at 23:27 -0800, ext David Brownell wrote:
> On Monday 24 November 2008, [EMAIL PROTECTED] wrote:
> > From: Eero Nurkkala <[EMAIL PROTECTED]>
> >
> > The amount of bytes to receive is read from wrong
> > place with omap 2430 and omap 3430.
>
> More simply: on all OMAPs with highspeed I2C support,
> which involves a FIFO and BUFSTAT_REG.
>
>
> > It is the 6 bits
> > starting from the bit 8 from BUFSTAT_REG that indicate
> > this amount. Not the 8 LSB:s. Only 6 LSB:s are used
> > for the TX buffer. Moreover, only the 6 LSB:s are
> > relevant for XDR.
> >
> > Signed-off-by: Eero Nurkkala <[EMAIL PROTECTED]>
> > ---
> > drivers/i2c/busses/i2c-omap.c | 25 +++++++++++++++++++------
> > 1 files changed, 19 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> > index 96f3bed..630702c 100644
> > --- a/drivers/i2c/busses/i2c-omap.c
> > +++ b/drivers/i2c/busses/i2c-omap.c
> > @@ -672,11 +672,19 @@ omap_i2c_isr(int this_irq, void *dev_id)
> > if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
> > u8 num_bytes = 1;
> > if (dev->fifo_size) {
>
> ... i.e. if (dev->rev >= OMAP_I2C_REV_ON_2430) ..
>
> > - if (stat & OMAP_I2C_STAT_RRDY)
> > + if (stat & OMAP_I2C_STAT_RRDY) {
> > num_bytes = dev->fifo_size;
> > - else
> > - num_bytes = omap_i2c_read_reg(dev,
> > + } else {
> > + if (dev->rev >= OMAP_I2C_REV_ON_2430)
> > + num_bytes =
> > + (omap_i2c_read_reg(dev,
> > + OMAP_I2C_BUFSTAT_REG)
> > + >> 8) & 0x3F;
> > + else
> > + num_bytes =
> > + omap_i2c_read_reg(dev,
> > OMAP_I2C_BUFSTAT_REG);
>
> ... so this "else" branch is not needed, neither is the "if" test defining
> the two branches ...
>
>
> > + }
> > }
> > while (num_bytes) {
> > num_bytes--;
> > @@ -711,11 +719,16 @@ omap_i2c_isr(int this_irq, void *dev_id)
> > if (stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)) {
> > u8 num_bytes = 1;
> > if (dev->fifo_size) {
>
> ... likewise ...
>
>
> > - if (stat & OMAP_I2C_STAT_XRDY)
> > + if (stat & OMAP_I2C_STAT_XRDY) {
> > num_bytes = dev->fifo_size;
> > - else
> > - num_bytes = omap_i2c_read_reg(dev,
> > + } else {
> > + num_bytes =
> > + omap_i2c_read_reg(dev,
> > OMAP_I2C_BUFSTAT_REG);
> > +
> > + if (dev->rev >= OMAP_I2C_REV_ON_2430)
> > + num_bytes &= 0x3F;
>
> ... and likewise.
>
>
> > + }
> > }
> > while (num_bytes) {
> > num_bytes--;
> > --
> > 1.6.0
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > the body of a message to [EMAIL PROTECTED]
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
> >
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
