From: David Brownell <[EMAIL PROTECTED]>

Remove some debug code from twl4030-usb which 'checkpatch.pl' warned
about.  Turn some other messages into debug code; and add some debug
messages in the "write verify" paths (so we can see if they matter).
This gives about 25% codespace shrinkage.

Signed-off-by: David Brownell <[EMAIL PROTECTED]>
---
 drivers/i2c/chips/twl4030-usb.c |   29 ++++++++++-------------------
 1 file changed, 10 insertions(+), 19 deletions(-)

--- a/drivers/i2c/chips/twl4030-usb.c
+++ b/drivers/i2c/chips/twl4030-usb.c
@@ -285,13 +285,18 @@ static int twl4030_i2c_write_u8_verify(s
            (twl4030_i2c_read_u8(module, &check, address) >= 0) &&
                                                (check == data))
                return 0;
+       dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
+                       1, module, address, check, data);
+
        /* Failed once: Try again */
        if ((twl4030_i2c_write_u8(module, data, address) >= 0) &&
            (twl4030_i2c_read_u8(module, &check, address) >= 0) &&
                                                (check == data))
                return 0;
-       /* Failed again: Return error */
+       dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
+                       2, module, address, check, data);
 
+       /* Failed again: Return error */
        return -EBUSY;
 }
 
@@ -304,23 +309,9 @@ static inline int twl4030_usb_write(stru
        int ret = 0;
 
        ret = twl4030_i2c_write_u8(TWL4030_MODULE_USB, data, address);
-       if (ret >= 0) {
-#if 0  /* debug */
-               u8 data1;
-               if (twl4030_i2c_read_u8(TWL4030_MODULE_USB, &data1,
-                                       address) < 0)
-                       dev_err(twl->dev, "re-read failed\n");
-               else
-                       dev_dbg(twl->dev,
-                              "Write %s wrote %x read %x from reg %x\n",
-                              (data1 == data) ? "succeed" : "mismatch",
-                              data, data1, address);
-#endif
-       } else {
-               dev_warn(twl->dev,
+       if (ret < 0)
+               dev_dbg(twl->dev,
                        "TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
-       }
-
        return ret;
 }
 
@@ -333,7 +324,7 @@ static inline int twl4030_readb(struct t
        if (ret >= 0)
                ret = data;
        else
-               dev_warn(twl->dev,
+               dev_dbg(twl->dev,
                        "TWL4030:readb[0x%x,0x%x] Error %d\n",
                                        module, address, ret);
 
@@ -655,7 +646,7 @@ static int __init twl4030_usb_probe(stru
                return -ENOMEM;
 
        if (!pdata) {
-               dev_info(&pdev->dev, "platform_data not available\n");
+               dev_dbg(&pdev->dev, "platform_data not available\n");
                return -EINVAL;
        }
 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to