This patch provides the support framework for PR785 boards.
More patches will follow that will allow complete programming
support for PR785 boards.
The board-omap3evm.c contains the I2C devices to be supported.
CONFIG_PR785 is configuration used for the PR784 boards.
Signed-off-by: Manikandan Pillai <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/board-omap3evm.c | 29 ++++++++++++++++++++++++++---
arch/arm/mach-omap2/mmc-twl4030.c | 5 +++--
drivers/i2c/chips/Kconfig | 11 +++++++++++
drivers/mfd/Kconfig | 14 ++++++++++++++
drivers/video/omap/lcd_omap3evm.c | 4 ++++
5 files changed, 58 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c
b/arch/arm/mach-omap2/board-omap3evm.c
index bc44cb5..f5f9ea5 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -42,6 +42,9 @@
#include "twl4030-generic-scripts.h"
#include "mmc-twl4030.h"
+#define OMAP3_I2C_STD 100
+#define OMAP3_I2C_FAST 400
+#define OMAP3_I2C_HS 2600
static struct resource omap3evm_smc911x_resources[] = {
[0] = {
@@ -144,6 +147,19 @@ static struct twl4030_platform_data omap3evm_twldata = {
.gpio = &omap3evm_gpio_data,
};
+#if defined(CONFIG_PR785)
+static struct i2c_board_info __initdata tps_6235x_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("tps62352_core_pwr", 0x4A),
+ .flags = I2C_CLIENT_WAKE,
+ },
+ {
+ I2C_BOARD_INFO("tps62353_mpu_pwr", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ },
+};
+#endif
+#if defined(CONFIG_TWL4030_CORE)
static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
{
I2C_BOARD_INFO("twl4030", 0x48),
@@ -152,13 +168,20 @@ static struct i2c_board_info __initdata
omap3evm_i2c_boardinfo[] = {
.platform_data = &omap3evm_twldata,
},
};
+#endif
static int __init omap3_evm_i2c_init(void)
{
- omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
+#if defined(CONFIG_PR785)
+ omap_register_i2c_bus(1, OMAP3_I2C_HS, tps_6235x_i2c_board_info,
+ ARRAY_SIZE(tps_6235x_i2c_board_info));
+#endif
+#if defined(CONFIG_TWL4030_CORE)
+ omap_register_i2c_bus(1, OMAP3_I2C_HS, omap3evm_i2c_boardinfo,
ARRAY_SIZE(omap3evm_i2c_boardinfo));
- omap_register_i2c_bus(2, 400, NULL, 0);
- omap_register_i2c_bus(3, 400, NULL, 0);
+#endif
+ omap_register_i2c_bus(2, OMAP3_I2C_FAST, NULL, 0);
+ omap_register_i2c_bus(3, OMAP3_I2C_FAST, NULL, 0);
return 0;
}
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c
b/arch/arm/mach-omap2/mmc-twl4030.c
index 626d668..daf10f3 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -167,7 +167,7 @@ static int twl_mmc_resume(struct device *dev, int slot)
*/
static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
{
- int ret;
+ int ret = 0;
u8 vmmc, dev_grp_val;
switch (1 << vdd) {
@@ -222,6 +222,7 @@ static int twl_mmc_set_voltage(struct twl_mmc_controller
*c, int vdd)
else
dev_grp_val = LDO_CLR; /* Power down */
+#if defined(CONFIG_TWL4030_CORE)
ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
dev_grp_val, c->twl_vmmc_dev_grp);
if (ret)
@@ -229,7 +230,7 @@ static int twl_mmc_set_voltage(struct twl_mmc_controller
*c, int vdd)
ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
vmmc, c->twl_mmc_dedicated);
-
+#endif
return ret;
}
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 4c73bb5..32cf887 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -186,6 +186,17 @@ config TWL4030_POWEROFF
tristate "TWL4030 device poweroff"
depends on TWL4030_CORE
+config TPS6235X
+ tristate "TPS6235x Power Management chips"
+ depends on I2C=y && ARCH_OMAP34XX && PR785=y
+ default n
+ help
+ If you say yes here you get support for the TPS6235x series of
+ Power Management chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called tps6235x.o.
+
config SENSORS_MAX6875
tristate "Maxim MAX6875 Power supply supervisor"
depends on EXPERIMENTAL
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2438aab..93f2c0a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -61,6 +61,8 @@ config UCB1400_CORE
To compile this driver as a module, choose M here: the
module will be called ucb1400_core.
+menu "Texas Instruments Power board Support"
+
config TWL4030_CORE
bool "Texas Instruments TWL4030/TPS659x0 Support"
depends on I2C=y && GENERIC_HARDIRQS && (ARCH_OMAP2 || ARCH_OMAP3)
@@ -84,6 +86,18 @@ config TWL4030_POWER
oscillators are switched off or on or reset when a sleep, wakeup
or warm reset event occurs.
+config PR785
+ bool "A Texas Instruments TPS6235X based Power Module"
+ depends on I2C=y && MACH_OMAP3EVM=y && GENERIC_GPIO && (ARCH_OMAP3)
+ default n
+ help
+ Say yes here if you are using the TPS6235x based PR785 Power Module
+ for the EVM boards. This core driver provides register access and IRQ
+ handling facilities, and registers devices for the various functions
+ so that function-specific drivers can bind to them.
+
+endmenu
+
config MFD_TMIO
bool
default n
diff --git a/drivers/video/omap/lcd_omap3evm.c
b/drivers/video/omap/lcd_omap3evm.c
index 90aa015..ac51dd0 100644
--- a/drivers/video/omap/lcd_omap3evm.c
+++ b/drivers/video/omap/lcd_omap3evm.c
@@ -66,9 +66,11 @@ static int omap3evm_panel_init(struct lcd_panel *panel,
gpio_direction_output(LCD_PANEL_LR, 1);
gpio_direction_output(LCD_PANEL_UD, 1);
+#if !defined(CONFIG_PR785)
twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN);
twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON);
twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF);
+#endif
bklight_level = 100;
return 0;
@@ -97,12 +99,14 @@ static unsigned long omap3evm_panel_get_caps(struct
lcd_panel *panel)
static int omap3evm_bklight_setlevel(struct lcd_panel *panel,
unsigned int level)
{
+#if !defined(CONFIG_PR785)
u8 c;
if ((level >= 0) && (level <= 100)) {
c = (125 * (100 - level)) / 100 + 2;
twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF);
bklight_level = level;
}
+#endif
return 0;
}
--
1.5.6
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
