On Fri, Nov 28, 2008 at 10:58:10AM +0530, ext Manikandan Pillai wrote:
> Implements the basic driver for TPS6235x devices populated on the
> PR785 board. tps6235x.c contains the driver code for TPS devices used on
> PR785 boards. Driver code is added it to the build.
Please, read Documentation/CodingStyle and
Documentation/kernel-doc-nano-HOWTO.txt, fix the issues and resend.
few comments below.
> Signed-off-by: Manikandan Pillai <[EMAIL PROTECTED]>
> ---
> drivers/i2c/chips/Makefile | 1 +
> drivers/i2c/chips/tps6235x.c | 416
> ++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 417 insertions(+), 0 deletions(-)
> create mode 100644 drivers/i2c/chips/tps6235x.c
>
> diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
> index cb9f2bb..749f1ec 100644
> --- a/drivers/i2c/chips/Makefile
> +++ b/drivers/i2c/chips/Makefile
> @@ -31,6 +31,7 @@ obj-$(CONFIG_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
> obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
> obj-$(CONFIG_RTC_X1205_I2C) += x1205.o
> obj-$(CONFIG_LP5521) += lp5521.o
> +obj-$(CONFIG_TPS6235X) += tps6235x.o
>
> ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
> EXTRA_CFLAGS += -DDEBUG
> diff --git a/drivers/i2c/chips/tps6235x.c b/drivers/i2c/chips/tps6235x.c
> new file mode 100644
> index 0000000..fd5ee0b
> --- /dev/null
> +++ b/drivers/i2c/chips/tps6235x.c
> @@ -0,0 +1,416 @@
> +/*
> + * drivers/i2c/chips/tps6235x.c
> + *
> + * TI TPS6235x device driver
> + *
> + * Copyright (C) 2008 Texas Instruments Inc
> + *
> + * Contributors:
> + * Manikandan Pillai <[EMAIL PROTECTED]>
> + *
> + * This package is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + *
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/delay.h>
> +
> +#define MODULE_NAME "tps6235x_power"
> +
> +/* Debug functions */
> +#ifdef DEBUG
> +
> +#define dump_reg(client, reg, val)
> \
> + do { \
> + tps6235x_read_reg(client, reg, &val); \
> + dev_dbg(&(client)->dev, "Reg(0x%.2X): 0x%.2X\n", reg, val); \
> + } while (0)
> +
> +#endif /* #ifdef DEBUG */
> +
> +/* 2 I2C devices on PR785 board for controlling voltage on CORE and MPU */
> +typedef enum TPS_module_type {
> + PR785_CORE_PWR,
> + PR785_MPU_PWR,
> +} TPS_module_type;
no CaMeLcAsE code should accepted. Neither typdefs.
> +
> +#define TPS6235X_REG_VSEL0 0
> +#define TPS6235X_REG_VSEL1 1
> +#define TPS6235X_REG_CTRL1 2
> +#define TPS6235X_REG_CTRL2 3
> +#define TPS6235X_REG_MAX TPS6235X_REG_CTRL2
> +
> +/* Device addresses for PR785 card */
> +#define PR785_62352_CORE_ADDR 0x4A
> +#define PR785_62353_MPU_ADDR 0x48
> +
> +/* Minimum and Maximum dc-dc voltage supported by the TPS6235x devices
> +All voltages given in millivolts */
> +#define PR785_MIN_CORE_VOLT 750
> +#define PR785_MAX_CORE_VOLT 1537
> +#define PR785_MIN_MPU_VOLT 750
> +#define PR785_MAX_MPU_VOLT 1537
> +
> +/* Maximum number of bytes to be read in a single read */
> +#define PR785_RETRY_COUNT 0x3
> +
> +/* Register bit settings */
> +#define TPS6235X_EN_DCDC (0x1 << 0x7)
> +#define TPS6235X_VSM_MSK (0x3F)
> +#define TPS6235X_EN_SYN_MSK (0x1 << 0x5)
> +#define TPS6235X_SW_VOLT_MSK (0x1 << 0x4)
> +#define TPS6235X_PWR_OK_MSK (0x1 << 0x5)
> +#define TPS6235X_OUT_DIS_MSK (0x1 << 0x6)
> +#define TPS6235X_GO_MSK (0x1 << 0x7)
> +
> +struct tps_6235x_info {
> + unsigned int state;
> + enum TPS_module_type tps_i2c_addr;
> + struct i2c_client *client;
> + struct device *i2c_dev;
> + /* platform data holder */
> + void *pdata;
> +};
> +
> +static struct tps_6235x_info tps_6235x_infodata[2];
> +
> +/*
> + * Get client pointer for a particular device
> + * Returns zero if successful, or non-zero otherwise.
> + */
> +static struct i2c_client *tps_6235x_get_client(TPS_module_type tps_mod_type)
> +{
> + if (tps_mod_type == PR785_CORE_PWR)
> + return tps_6235x_infodata[0].client;
> + else if (tps_mod_type == PR785_MPU_PWR)
> + return tps_6235x_infodata[1].client;
> + else
> + return NULL;
> +}
> +
> +/*
> + * Read a value from a register in an tps_6235x device.
> + * The value is returned in 'val'.
> + * Returns zero if successful, or non-zero otherwise.
> + */
> +static int tps_6235x_read_reg(struct i2c_client *client, u8 reg, u8 *val)
> +{
> + int err;
> + struct i2c_msg msg[2];
> + u8 data;
> +
> + if (!client->adapter)
> + return -ENODEV;
> +
> + /* [MSG1] fill the register address data */
> + data = reg;
> + msg[0].addr = client->addr;
> + msg[0].len = 1;
> + msg[0].flags = 0;
> + msg[0].buf = &data;
> +
> + /* [MSG2] fill the data rx buffer */
> + msg[1].addr = client->addr;
> + msg[1].len = 1; /* only 1 byte */
> + msg[1].flags = I2C_M_RD; /* Read the register values */
> + msg[1].buf = val;
> + err = i2c_transfer(client->adapter, msg, 2);
> + if (err >= 0)
> + return 0;
> +
> + dev_err(&client->dev,
> + "read from device 0x%.2x, offset 0x%.2x error %d\n",
> + client->addr, reg, err);
> +
> + return err;
> +}
> +
> +/*
> + * Write a value to a register in an tps_6235x device.
> + * Returns zero if successful, or non-zero otherwise.
> + */
> +static int tps_6235x_write_reg(struct i2c_client *client, u8 reg, u8 val)
> +{
> + int err;
> + int retry = 0;
> + struct i2c_msg msg[1];
> + u8 data[2];
> +
> + if (!client->adapter)
> + return -ENODEV;
> +
> +again:
> + data[0] = reg; /* Register offset */
> + data[1] = val; /* Register value */
> + msg->addr = client->addr;
> + msg->len = 2;
> + msg->flags = 0; /* write operation */
> + msg->buf = data;
> +
> + err = i2c_transfer(client->adapter, msg, 1);
> + if (err >= 0)
> + return 0;
> +
> + dev_err(&client->dev,
> + "wrote 0x%.2x to offset 0x%.2x error %d\n", val, reg, err);
> +
> + if (retry <= PR785_RETRY_COUNT) {
> + dev_info(&client->dev, "retry ... %d\n", retry);
> + retry++;
> + schedule_timeout(msecs_to_jiffies(20));
> + goto again;
> + }
> + return err;
> +}
> +
> +/**
> +* pwr_i2c_read - Allows the caller to read one register from TPS device
> +* based on the address given. For the PR785 it reads
> +* only 1 byte into a specified register
> +* tps_mod_type - Enum for the device to be read
> +* reg - Register to be read from(value has to be between 0-3
> +* val - value read from the reg
> +* Retval - 0 -> Success else non-zero
> +**/
> +int pwr_i2c_read(TPS_module_type tps_mod_type, u8 reg, u8 *val)
> +{
> + struct i2c_client *client;
> +
> + client = tps_6235x_get_client(tps_mod_type);
> + /* check if register is less than <= 3 Register is 0 -3 */
> + if (reg > TPS6235X_REG_MAX)
> + return -1;
> +
> + return tps_6235x_read_reg(client, reg, val);
> +}
> +EXPORT_SYMBOL(pwr_i2c_read);
> +
> +/**
> +* pwr_i2c_write - Allows the caller to write one register from TPS device
> +* based on the address given. For the PR785 it writes
> +* only 1 byte into a specified register
> +* tps_mod_type - Enum for the device to be written
> +* reg - Register to be written to(value has to be between 0-3
> +* val - value to be written to reg
> +* Retval - 0 -> Success else non-zero
> +**/
> +int pwr_i2c_write(TPS_module_type tps_mod_type, u8 reg, u8 val)
> +{
> + struct i2c_client *client;
> +
> + client = tps_6235x_get_client(tps_mod_type);
> +
> + /* check if register is less than <= 3 Register is 0 -3 */
> + if (reg > TPS6235X_REG_MAX)
> + return -1;
> +
> + return tps_6235x_write_reg(client, reg, val);
> +}
> +EXPORT_SYMBOL(pwr_i2c_write);
> +
> +/**
> +* TPSPR785 - Specific functions
> +* pr785_enbl_dcdc - Allows the caller to enable or disable the TPS6235x
> device
> +* on the PR785 board. The voltage for PR785 is selected by
> +* VSEL1 register since VSEL pin is kept high
> +*
> +* flag - 1 == enable 0 == disable
> +* Retval - 0 -> Success else non-zero
> +**/
> +int pr785_enbl_dcdc(TPS_module_type tps_mod_type, unsigned int en_flag)
> +{
> + unsigned char vsel1;
> + int ret;
> +
> + ret = pwr_i2c_read(tps_mod_type, TPS6235X_REG_VSEL1, &vsel1);
> + if (ret == 0) {
> + if (en_flag)
> + vsel1 |= TPS6235X_EN_DCDC;
> + else
> + vsel1 &= ~(TPS6235X_EN_DCDC);
> + ret = pwr_i2c_write(tps_mod_type, TPS6235X_REG_VSEL1, vsel1);
> + }
> + return ret;
> +}
> +EXPORT_SYMBOL(pr785_enbl_dcdc);
> +
> +
one blank line is enough.
> +/**
> +* TPSPR785 - Specific functions
> +* pr785_set_dcdc_volt - Allows the caller to set a particular voltage on
> +* for CORE or MPU
> +*
> +* voltage - voltage to be set in millivolts (75--1537)
> +* Retval - 0 -> Success else non-zero
> +**/
> +int pr785_set_dcdc_volt(TPS_module_type tps_mod_type, unsigned int
> millivolts)
> +{
> + unsigned char vsel1;
> + unsigned int volt;
> +
> + /* check if the millivolts is within range */
> + if ((millivolts < PR785_MIN_CORE_VOLT) ||
> + (millivolts > PR785_MAX_CORE_VOLT))
> + return -1;
> +
> + /* Output voltage set is = min_op_volt + ( VSM * 12.5mv) */
> + volt = millivolts - PR785_MIN_CORE_VOLT;
> + volt /= 25;
> + volt *= 2;
> + vsel1 = ((TPS6235X_EN_DCDC) | (volt & TPS6235X_VSM_MSK));
> + return pwr_i2c_write(tps_mod_type, TPS6235X_REG_VSEL1, vsel1);
> +}
> +EXPORT_SYMBOL(pr785_set_dcdc_volt);
> +
> +/**
> +* TPSPR785 - Specific functions
> +* pr785_get_dcdc_volt - Allows the caller to get the set voltage on a
> +* particular TPS 6235x device on PR785 card
> +*
> +* voltage - voltage to be set in millivolts (75--1537)
> +* Retval - 0 -> Success else non-zero
> +**/
> +int pr785_get_dcdc_volt(TPS_module_type tps_mod_type, unsigned int
> *millivolts)
> +{
> + unsigned char vsel1;
> + unsigned int volt;
> +
> + /* Read the VSEL1 register to get VSM */
> + pwr_i2c_read(tps_mod_type, TPS6235X_REG_VSEL1, &vsel1);
> + /* Output voltage set is = min_op_volt + ( VSM * 12.5mv) */
> + /* To cut out floating point operation we will multiply by 25
> + divide by 2 */
> + volt = (((vsel1 & TPS6235X_VSM_MSK) * 25) / 2) + PR785_MIN_CORE_VOLT;
> + *millivolts = volt;
> + return 0;
> +}
> +EXPORT_SYMBOL(pr785_get_dcdc_volt);
> +
> +/**
> + * tps_6235x_probe - TPS6235x driver i2c probe handler
> + * @client: i2c driver client device structure
> + *
> + * Register PR785 as an i2c client device driver
> + */
> +static struct i2c_driver tps_6235x_i2c_driver;
> +
> +static
> +int tps_6235x_probe(struct i2c_client *client, const struct i2c_device_id
> *id)
> +{
> + unsigned char reg_val;
> +
> + printk(KERN_INFO "tps_6235x_probe:TPS addr = %x\n", (int)client->addr);
> +
> + if (i2c_get_clientdata(client))
> + return -EBUSY;
> +
> + /* Device probed is TPS62352 CORE pwr chip if driver_data = 0 */
> + /* Device probed is TPS62353 MPU pwr chip if driver_data = 1 */
> + tps_6235x_infodata[id->driver_data].client = client;
> + tps_6235x_infodata[id->driver_data].tps_i2c_addr = client->addr;
> + tps_6235x_infodata[id->driver_data].state = 1;
> + tps_6235x_infodata[id->driver_data].i2c_dev = &client->dev;
> +
> + tps_6235x_read_reg(client, TPS6235X_REG_CTRL2, ®_val);
> + reg_val |= (TPS6235X_OUT_DIS_MSK | TPS6235X_GO_MSK);
> + tps_6235x_write_reg(client, TPS6235X_REG_CTRL2, reg_val);
> + tps_6235x_read_reg(client, TPS6235X_REG_CTRL2, ®_val);
> +
> + if (reg_val & TPS6235X_PWR_OK_MSK)
> + printk(KERN_INFO "Power is OK %x\n", reg_val);
> + else
> + printk(KERN_INFO "Power not within range = %x\n", reg_val);
> + return 0;
> +}
> +
> +/**
> + * tps_6235x_remove - TPS6235x driver i2c remove handler
> + * @client: i2c driver client device structure
> + *
> + * UnregisterPR785 as an i2c client device driver
> + */
> +static int __exit tps_6235x_remove(struct i2c_client *client)
> +{
> +#ifdef DEBUG
> + printk(KERN_INFO "tps_6235x_remove invoked\n");
> +#endif
> +
> + if (!client->adapter)
> + return -ENODEV; /* our client isn't attached */
> +
> + i2c_set_clientdata(client, NULL);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id tps_6235x_id[] = {
> + { "tps62352_core_pwr", 0},
> + { "tps62353_mpu_pwr", 1},
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, tps_6235x_id);
> +
> +static struct i2c_driver tps_6235x_i2c_driver = {
> + .driver = {
> + .name = "tps6235x_power",
> + .owner = THIS_MODULE,
> + },
> + .probe = tps_6235x_probe,
> + .remove = __exit_p(tps_6235x_remove),
> + .id_table = tps_6235x_id,
> +};
> +
> +/**
> + * tps_6235x_init
> + *
> + * Module init function
> + */
> +static int __init tps_6235x_init(void)
> +{
> + int err;
> +
> +#ifdef DEBUG
> + printk(KERN_INFO "tps_6235x_init invoked\n");
> +#endif
> +
> + err = i2c_add_driver(&tps_6235x_i2c_driver);
> + if (err) {
> + printk(KERN_ERR "Failed to register " MODULE_NAME ".\n");
> + return err;
> + } else {
> + printk(KERN_INFO "I2c driver registered\n");
> + }
> + return 0;
> +}
> +
> +/**
> + * tps_6235x_cleanup
> + *
> + * Module exit function
> + */
> +static void __exit tps_6235x_cleanup(void)
> +{
> +#ifdef DEBUG
> + printk(KERN_INFO "tps_6235x_cleanup invoked\n");
> +#endif
> + i2c_del_driver(&tps_6235x_i2c_driver);
> +}
> +
> +late_initcall(tps_6235x_init);
> +module_exit(tps_6235x_cleanup);
> +
> +MODULE_AUTHOR("Texas Instruments");
> +MODULE_DESCRIPTION("TPS6235x based PR785 linux driver");
> +MODULE_LICENSE("GPL");
> --
> 1.5.6
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
