Tero Kristo <[EMAIL PROTECTED]> writes:
> Off mode is now using the omap2 retention fix code for scanning GPIOs
> only during off-mode transitions. All the *non_wakeup_gpios variables
> are now used for off-mode transition tracking on OMAP3. This patch fixes
> cases where GPIO state changes are missed during off-mode.
>
> Signed-off-by: Tero Kristo <[EMAIL PROTECTED]>
Can you rework this slightly to use runtime cpu_is_* checks instead
of compile-time #ifdefs?
This will currently not do the "right thing" on a kernel compiled
with both omap2 and omap3 support.
Thanks,
Kevin
> ---
> arch/arm/mach-omap2/pm34xx.c | 10 ++++++----
> arch/arm/plat-omap/gpio.c | 18 ++++++++++++++++--
> 2 files changed, 22 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> index 152b4e7..082e4f4 100644
> --- a/arch/arm/mach-omap2/pm34xx.c
> +++ b/arch/arm/mach-omap2/pm34xx.c
> @@ -324,14 +324,15 @@ void omap_sram_idle(void)
> core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
> if (per_next_state < PWRDM_POWER_ON) {
> omap_uart_prepare_idle(2);
> - omap2_gpio_prepare_for_retention();
> if (per_next_state == PWRDM_POWER_OFF) {
> if (core_next_state == PWRDM_POWER_ON) {
> per_next_state = PWRDM_POWER_RET;
> pwrdm_set_next_pwrst(per_pwrdm, per_next_state);
> per_state_modified = 1;
> - } else
> + } else {
> + omap2_gpio_prepare_for_retention();
> omap3_per_save_context();
> + }
> }
> }
>
> @@ -404,9 +405,10 @@ void omap_sram_idle(void)
> /* PER */
> if (per_next_state < PWRDM_POWER_ON) {
> per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
> - if (per_prev_state == PWRDM_POWER_OFF)
> + if (per_prev_state == PWRDM_POWER_OFF) {
> omap3_per_restore_context();
> - omap2_gpio_resume_after_retention();
> + omap2_gpio_resume_after_retention();
> + }
> omap_uart_resume_idle(2);
> if (per_state_modified)
> pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF);
> diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
> index 62349fd..b45bf9d 100644
> --- a/arch/arm/plat-omap/gpio.c
> +++ b/arch/arm/plat-omap/gpio.c
> @@ -556,7 +556,9 @@ static inline void set_24xx_gpio_triggering(struct
> gpio_bank *bank, int gpio,
> else
> __raw_writel(1 << gpio, bank->base
> + OMAP24XX_GPIO_CLEARWKUENA);
> +#ifdef CONFIG_ARCH_OMAP24XX
> } else {
> +#endif
> if (trigger != 0)
> bank->enabled_non_wakeup_gpios |= gpio_bit;
> else
> @@ -1485,9 +1487,11 @@ static int __init _omap_gpio_init(void)
>
> #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
> if (bank->method == METHOD_GPIO_24XX) {
> +#ifdef CONFIG_ARCH_OMAP24XX
> static const u32 non_wakeup_gpios[] = {
> 0xe203ffc0, 0x08700040
> };
> +#endif
>
> __raw_writel(0x00000000, bank->base +
> OMAP24XX_GPIO_IRQENABLE1);
> __raw_writel(0xffffffff, bank->base +
> OMAP24XX_GPIO_IRQSTATUS1);
> @@ -1495,8 +1499,10 @@ static int __init _omap_gpio_init(void)
>
> /* Initialize interface clock ungated, module enabled */
> __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
> +#ifdef CONFIG_ARCH_OMAP24XX
> if (i < ARRAY_SIZE(non_wakeup_gpios))
> bank->non_wakeup_gpios = non_wakeup_gpios[i];
> +#endif
> gpio_count = 32;
> }
> #endif
> @@ -1666,7 +1672,11 @@ void omap2_gpio_prepare_for_retention(void)
>
> /* Remove triggering for all non-wakeup GPIOs. Otherwise spurious
> * IRQs will be generated. See OMAP2420 Errata item 1.101. */
> +#ifdef CONFIG_ARCH_OMAP24XX
> for (i = 0; i < gpio_bank_count; i++) {
> +#else
> + for (i = 1; i < gpio_bank_count; i++) {
> +#endif
> struct gpio_bank *bank = &gpio_bank[i];
> u32 l1, l2;
>
> @@ -1681,7 +1691,7 @@ void omap2_gpio_prepare_for_retention(void)
> bank->saved_risingdetect = l2;
> l1 &= ~bank->enabled_non_wakeup_gpios;
> l2 &= ~bank->enabled_non_wakeup_gpios;
> -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
> +#if defined(CONFIG_ARCH_OMAP24XX)
> __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
> __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
> #endif
> @@ -1700,7 +1710,11 @@ void omap2_gpio_resume_after_retention(void)
>
> if (!workaround_enabled)
> return;
> +#ifdef CONFIG_ARCH_OMAP24XX
> for (i = 0; i < gpio_bank_count; i++) {
> +#else
> + for (i = 1; i < gpio_bank_count; i++) {
> +#endif
> struct gpio_bank *bank = &gpio_bank[i];
> u32 l;
>
> @@ -1720,7 +1734,7 @@ void omap2_gpio_resume_after_retention(void)
> l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
> #endif
> l ^= bank->saved_datain;
> - l &= bank->non_wakeup_gpios;
> + l &= bank->enabled_non_wakeup_gpios;
> if (l) {
> u32 old0, old1;
> #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
> --
> 1.5.4.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
