On Monday 01 December 2008, David Brownell wrote: > > - Pointer to init_reg_seq, which is pointer to array of structure > > for tvp514x_regs. This is little bit ugly, since will have to > > export tvp514x_regs structure. > > The platform_data should not hold such stuff; it's not board-specific. > I'd expect platform_data to hold regulator_init_data as needed to > instantiate the regulator; and maybe other stuff needed on this board > too. Floor and ceiling parameters, maybe, unless they change at runtime.
Apologies, I was confusing this driver with another. For a video codec, the platform_data should say things like which of the dozen or so input channels are wired up, and how; and how the outputs are encoded (8 bits, 2x 8 bits, 10 bits, 2x 10 bits, etc). Nothing to do with regulators or DVFS. And the id parameter to probe() is enough to tell whether this is a '46 device, with extra registers and input channels, or a '47 that's less capable (but lower power, etc). > The init sequence wouldn't matter at all for i2c_get_clientdata(), > since it should only kick in during probe(). -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
