From: Santosh Shilimkar <[EMAIL PROTECTED]>
This fixes the spurious interrupt issue on a DMA channel.
Signed-off-by: Santosh Shilimkar <[EMAIL PROTECTED]>
Acked By: Nishant Kamat <[EMAIL PROTECTED]>
Acked By: Gopinath Thara <[EMAIL PROTECTED]>
---
--- omapkernel.orig/arch/arm/plat-omap/include/mach/dma.h 2008-12-04
10:29:08.949018434 +0530
+++ omapkernel/arch/arm/plat-omap/include/mach/dma.h 2008-12-04
11:14:25.359087775 +0530
@@ -67,7 +67,11 @@
#define OMAP_DMA4_CAPS_4 0x74
#define OMAP1_LOGICAL_DMA_CH_COUNT 17
+#ifdef CONFIG_OMAP_DMA_LIBRARY_CHANNELS
+#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT CONFIG_OMAP_DMA_LIBRARY_CHANNELS
+#else
#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */
+#endif
/* Common channel specific registers for omap1 */
#define OMAP1_DMA_CH_BASE(n) (0x40 * (n) + 0x00)
Index: omapkernel/arch/arm/plat-omap/Kconfig
===================================================================
--- omapkernel.orig/arch/arm/plat-omap/Kconfig 2008-12-04 10:29:08.949018434
+0530
+++ omapkernel/arch/arm/plat-omap/Kconfig 2008-12-04 10:38:21.883850512
+0530
@@ -256,6 +256,18 @@ config OMAP_SERIAL_WAKE
to data on the serial RX line. This allows you to wake the
system from serial console.
+
+config OMAP_DMA_LIBRARY_CHANNELS
+ int "DMA channels controlled by the kernel DMA library"
+ range 24 32
+ depends on ARCH_OMAP3
+ default "32"
+ help
+ Some of the OMAP System DMA channels may need to be
+ reserved for software that don't use the DMA library, such as
+ security drivers. Use this option to limit the number of channels
+ controlled by the kernel DMA library.
+
endmenu
endif
Index: omapkernel/arch/arm/configs/omap_3430sdp_defconfig
===================================================================
--- omapkernel.orig/arch/arm/configs/omap_3430sdp_defconfig 2008-12-04
10:29:08.949018434 +0530
+++ omapkernel/arch/arm/configs/omap_3430sdp_defconfig 2008-12-04
10:38:21.884850481 +0530
@@ -177,7 +177,7 @@ CONFIG_ARCH_OMAP_OTG=y
# CONFIG_ARCH_OMAP1 is not set
# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
-
+CONFIG_OMAP_DMA_LIBRARY_CHANNELS=24
#
# OMAP Feature Selections
#
Index: omapkernel/arch/arm/plat-omap/dma.c
===================================================================
--- omapkernel.orig/arch/arm/plat-omap/dma.c 2008-12-04 10:38:16.732010840
+0530
+++ omapkernel/arch/arm/plat-omap/dma.c 2008-12-04 11:11:07.671274902 +0530
@@ -1946,7 +1946,7 @@ static int omap2_dma_handle_ch(int ch)
/* STATUS register count is from 1-32 while our is 0-31 */
static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
{
- u32 val;
+ u32 val, enable_reg;
int i;
val = dma_read(IRQSTATUS_L0);
@@ -1955,6 +1955,8 @@ static irqreturn_t omap2_dma_irq_handler
printk(KERN_WARNING "Spurious DMA IRQ\n");
return IRQ_HANDLED;
}
+ enable_reg = dma_read(IRQENABLE_L0);
+ val &= enable_reg; /* Dispatch only relevant interrupts */
for (i = 0; i < dma_lch_count && val != 0; i++) {
if (val & 1)
omap2_dma_handle_ch(i);
Index: omapkernel/arch/arm/configs/omap_ldp_defconfig
===================================================================
--- omapkernel.orig/arch/arm/configs/omap_ldp_defconfig 2008-12-04
11:18:54.000000000 +0530
+++ omapkernel/arch/arm/configs/omap_ldp_defconfig 2008-12-04
11:19:33.507466484 +0530
@@ -177,6 +177,7 @@ CONFIG_ARCH_OMAP_OTG=y
# CONFIG_ARCH_OMAP1 is not set
# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
+CONFIG_OMAP_DMA_LIBRARY_CHANNELS=32
#
# OMAP Feature Selections
#
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
