On Thu, Dec 04, 2008 at 03:53:26PM +0530, ext Manikandan Pillai wrote:
> Resending this patch with fixes for comments:
> This patch provides the support framework for PR785 boards.
> More patches will follow that will allow complete programming
> support for PR785 boards.
> The board-omap3evm.c contains the I2C devices to be supported.
> CONFIG_PR785 is configuration used for the PR785 boards. This patch
> provides support for TPS6235x devices on PR785 through I2C2 bus.
> Support for I2C2 or I2C4 and selection between them will be given in
> subsequent patches.
>
> The selection of TWL4030 or PR785 is for now through compile time
> option since a real time check is not clear.
>
> Signed-off-by: Manikandan Pillai <[EMAIL PROTECTED]>
> ---
> arch/arm/mach-omap2/board-omap3evm.c | 22 +++++++++++++++++++++-
> arch/arm/mach-omap2/mmc-twl4030.c | 5 +++--
> drivers/mfd/Kconfig | 14 ++++++++++++++
> drivers/video/omap/lcd_omap3evm.c | 4 ++++
> 4 files changed, 42 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-omap3evm.c
> b/arch/arm/mach-omap2/board-omap3evm.c
> index 8a1b86e..22ac2e9 100644
> --- a/arch/arm/mach-omap2/board-omap3evm.c
> +++ b/arch/arm/mach-omap2/board-omap3evm.c
> @@ -42,7 +42,6 @@
> #include "twl4030-generic-scripts.h"
> #include "mmc-twl4030.h"
>
> -
> static struct resource omap3evm_smc911x_resources[] = {
> [0] = {
> .start = OMAP3EVM_ETHR_START,
> @@ -90,6 +89,7 @@ static struct omap_uart_config omap3_evm_uart_config
> __initdata = {
> .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
> };
>
> +#if defined(CONFIG_TWL4030_CORE)
> static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
> .gpio_base = OMAP_MAX_GPIO_LINES,
> .irq_base = TWL4030_GPIO_IRQ_BASE,
> @@ -151,11 +151,31 @@ static struct i2c_board_info __initdata
> omap3evm_i2c_boardinfo[] = {
> .platform_data = &omap3evm_twldata,
> },
> };
> +#endif
> +
> +#if defined(CONFIG_PR785)
> +static struct i2c_board_info __initdata tps_6235x_i2c_board_info[] = {
> + {
> + I2C_BOARD_INFO("tps62352", 0x4A),
> + .flags = I2C_CLIENT_WAKE,
> + },
> + {
> + I2C_BOARD_INFO("tps62353", 0x48),
> + .flags = I2C_CLIENT_WAKE,
> + },
> +};
> +#endif
>
> static int __init omap3_evm_i2c_init(void)
> {
> +#if defined(CONFIG_PR785)
> + omap_register_i2c_bus(1, 2600, tps_6235x_i2c_board_info,
> + ARRAY_SIZE(tps_6235x_i2c_board_info));
> +#endif
> +#if defined(CONFIG_TWL4030_CORE)
> omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
> ARRAY_SIZE(omap3evm_i2c_boardinfo));
> +#endif
> omap_register_i2c_bus(2, 400, NULL, 0);
> omap_register_i2c_bus(3, 400, NULL, 0);
> return 0;
> diff --git a/arch/arm/mach-omap2/mmc-twl4030.c
> b/arch/arm/mach-omap2/mmc-twl4030.c
> index 626d668..daf10f3 100644
> --- a/arch/arm/mach-omap2/mmc-twl4030.c
> +++ b/arch/arm/mach-omap2/mmc-twl4030.c
it doesn't make sense to build this file if you don't have twl4030 in
the board. Better to have something like mmc-tps6235x.c or something
like that.
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 650b51c..3fee589 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -61,6 +61,8 @@ config UCB1400_CORE
> To compile this driver as a module, choose M here: the
> module will be called ucb1400_core.
>
> +menu "Texas Instruments Power board Support"
> +
> config TWL4030_CORE
> bool "Texas Instruments TWL4030/TPS659x0 Support"
> depends on I2C=y && GENERIC_HARDIRQS
> @@ -84,6 +86,18 @@ config TWL4030_POWER
> oscillators are switched off or on or reset when a sleep, wakeup
> or warm reset event occurs.
>
> +config PR785
> + bool "A Texas Instruments TPS6235X based Power Module"
> + depends on I2C=y && MACH_OMAP3EVM=y && GENERIC_GPIO && (ARCH_OMAP3)
> + default n
> + help
> + Say yes here if you are using the TPS6235x based PR785 Power Module
> + for the EVM boards. This core driver provides register access and IRQ
> + handling facilities, and registers devices for the various functions
> + so that function-specific drivers can bind to them.
> +
> +endmenu
where's the driver for it ??
--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
