This patch allows the MMC1 support on OMAP2 EVM board with
TPS6235x based PR785 boards. Files mmc-pr785.* contain the
drivers.
Signed-off-by: Manikandan Pillai <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/Makefile | 9 +++++-
arch/arm/mach-omap2/board-omap3evm.c | 22 ++++++++++++-
arch/arm/mach-omap2/mux.c | 13 ++++++++
arch/arm/plat-omap/devices.c | 11 +++++++
arch/arm/plat-omap/include/mach/mmc.h | 12 +++++++
arch/arm/plat-omap/include/mach/mux.h | 7 ++++
drivers/mmc/host/omap_hsmmc.c | 52 +++++++++++++++++++++++++++++++++
7 files changed, 123 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 3897347..3a0b3f5 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -56,10 +56,17 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) +=
board-3430sdp.o \
usb-ehci.o \
board-3430sdp-flash.o
obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
- mmc-twl4030.o \
usb-musb.o usb-ehci.o \
board-omap3evm-flash.o \
twl4030-generic-scripts.o
+ifeq ($(CONFIG_PR785),y)
+obj-$(CONFIG_MACH_OMAP3EVM) += mmc-pr785.o
+endif
+ifeq ($(CONFIG_TWL4030_CORE),y)
+obj-$(CONFIG_MACH_OMAP3EVM) += mmc-twl4030.o
+endif
+
+
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
usb-musb.o usb-ehci.o \
mmc-twl4030.o \
diff --git a/arch/arm/mach-omap2/board-omap3evm.c
b/arch/arm/mach-omap2/board-omap3evm.c
index ab3070d..e8eaa6b 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -40,7 +40,12 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "twl4030-generic-scripts.h"
+#if defined(CONFIG_PR785)
+#include "mmc-pr785.h"
+#endif
+#if defined(CONFIG_TWL4030_CORE)
#include "mmc-twl4030.h"
+#endif
static struct resource omap3evm_smc911x_resources[] = {
[0] = {
@@ -258,15 +263,28 @@ static struct platform_device *omap3_evm_devices[]
__initdata = {
&omap3evm_smc911x_device,
};
-static struct twl4030_hsmmc_info mmc[] __initdata = {
+#if defined(CONFIG_PR785)
+static struct pr785_hsmmc_info mmc[] __initdata = {
{
.mmc = 1,
.wires = 4,
- .gpio_cd = -EINVAL,
+ .gpio_cd = (IH_GPIO_BASE + 140),
.gpio_wp = -EINVAL,
},
{} /* Terminator */
};
+#endif
+#if defined(CONFIG_TWL4030_CORE)
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ },
+ {} /* Terminator */
+};
+#endif
static void __init omap3_evm_init(void)
{
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index dacb41f..68531b6 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -459,6 +459,19 @@ MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AF6_34XX_GPIO140", 0x16c,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AF5_34XX_GPIO142", 0x170,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AE5_34XX_GPIO143", 0x172,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+
};
#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 4c81eaf..85cf2ad 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -420,6 +420,16 @@ static struct regulator_init_data tps_regulator_data[] = {
static void omap_init_pr785(void)
{
+ /* Initialize the mux settings for PR785 power module board */
+ if (cpu_is_omap343x()) {
+ omap_cfg_reg(AF26_34XX_GPIO0);
+ omap_cfg_reg(AF22_34XX_GPIO9);
+ omap_cfg_reg(AF6_34XX_GPIO140);
+ omap_cfg_reg(AE6_34XX_GPIO141);
+ omap_cfg_reg(AF5_34XX_GPIO142);
+ omap_cfg_reg(AE5_34XX_GPIO143);
+ }
+
(void) platform_device_register(&omap_tps6235x_device[0]);
(void) platform_device_register(&omap_tps6235x_device[1]);
}
@@ -458,6 +468,7 @@ static int __init omap_init_devices(void)
omap_init_uwire();
omap_init_wdt();
omap_init_rng();
+ omap_init_pr785();
return 0;
}
arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/include/mach/mmc.h
b/arch/arm/plat-omap/include/mach/mmc.h
index 031250f..9ccceed 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -36,6 +36,18 @@
#define OMAP_MMC_MAX_SLOTS 2
+#if defined(CONFIG_MACH_OMAP3EVM) && defined(CONFIG_PR785)
+#define OMAP_PR785_MMC1_VSET 0
+#define OMAP_PR785_MMC1_EN 9
+#define OMAP_PR785_MMC1_CD 140
+#define OMAP_PR785_MMC1_CD_MSK ((1<<12))
+
+/* Workaround for MMC Card insertion and deletion interrupt since
+ Rising and falling interupt detection does not work */
+#define OMAP_GPIO5_MMC_LOWLVL (0x49056040)
+#define OMAP_GPIO5_MMC_HIGHLVL (0x49056044)
+#endif
+
struct omap_mmc_platform_data {
/* number of slots per controller */
diff --git a/arch/arm/plat-omap/include/mach/mux.h
b/arch/arm/plat-omap/include/mach/mux.h
index f4362b8..ef1ef9b 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -790,6 +790,13 @@ enum omap34xx_index {
*/
AH8_34XX_GPIO29,
J25_34XX_GPIO170,
+ AF26_34XX_GPIO0,
+ AF22_34XX_GPIO9,
+ AF6_34XX_GPIO140,
+ AE6_34XX_GPIO141,
+ AF5_34XX_GPIO142,
+ AE5_34XX_GPIO143
+
};
struct omap_mux_cfg {
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 0df6841..0dc7ddf 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -32,6 +32,8 @@
#include <mach/board.h>
#include <mach/mmc.h>
#include <mach/cpu.h>
+#include <mach/gpio.h>
+#include <mach/io.h>
/* OMAP HSMMC Host Controller Registers */
#define OMAP_HSMMC_SYSCONFIG 0x0010
@@ -538,6 +540,32 @@ static void mmc_omap_detect(struct work_struct *work)
static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id)
{
struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id;
+ unsigned int value;
+
+#if defined(CONFIG_MACH_OMAP3EVM) && defined(CONFIG_PR785)
+ value = omap_readl(OMAP_GPIO5_MMC_LOWLVL);
+ if (value & OMAP_PR785_MMC1_CD_MSK) {
+ /* if a card is inserted, CD pin is low and hence to detect
+ Card pull, the interrupt is set to high level */
+ value = omap_readl(OMAP_GPIO5_MMC_LOWLVL);
+ value &= ~(OMAP_PR785_MMC1_CD_MSK);
+ omap_writel(value, OMAP_GPIO5_MMC_LOWLVL);
+
+ value = omap_readl(OMAP_GPIO5_MMC_HIGHLVL);
+ value |= OMAP_PR785_MMC1_CD_MSK;
+ omap_writel(value, OMAP_GPIO5_MMC_HIGHLVL);
+ } else {
+ /* if a card is removed, CD pin is high and hence to detect
+ Card plug, the interrupt is set to low level */
+ value = omap_readl(OMAP_GPIO5_MMC_HIGHLVL);
+ value &= ~(OMAP_PR785_MMC1_CD_MSK);
+ omap_writel(value, OMAP_GPIO5_MMC_HIGHLVL);
+
+ value = omap_readl(OMAP_GPIO5_MMC_LOWLVL);
+ value |= OMAP_PR785_MMC1_CD_MSK;
+ omap_writel(value, OMAP_GPIO5_MMC_LOWLVL);
+ }
+#endif
host->carddetect = mmc_slot(host).card_detect(irq);
schedule_work(&host->mmc_carddetect_work);
@@ -863,6 +891,7 @@ static int __init omap_mmc_probe(struct platform_device
*pdev)
int ret = 0, irq;
u32 hctl, capa;
+
if (pdata == NULL) {
dev_err(&pdev->dev, "Platform Data is missing\n");
return -ENXIO;
@@ -1009,7 +1038,11 @@ static int __init omap_mmc_probe(struct platform_device
*pdev)
if ((mmc_slot(host).card_detect_irq) && (mmc_slot(host).card_detect)) {
ret = request_irq(mmc_slot(host).card_detect_irq,
omap_mmc_cd_handler,
+#if defined(CONFIG_MACH_OMAP3EVM) && defined(CONFIG_PR785)
+ IRQF_TRIGGER_LOW
+#else
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
+#endif
| IRQF_DISABLED,
mmc_hostname(mmc), host);
if (ret) {
@@ -1223,6 +1256,22 @@ static struct platform_driver omap_mmc_driver = {
static int __init omap_mmc_init(void)
{
+#if defined(CONFIG_MACH_OMAP3EVM) && defined(CONFIG_PR785)
+ /* setup the GPIO for MMC for PR785 Rev ES2 power module */
+ /* Setup GPIO 0 - MMC1_VSET */
+ gpio_direction_output(OMAP_PR785_MMC1_VSET, 1);
+ /* Setup GPIO 9 - MMC1_EN */
+ gpio_direction_output(OMAP_PR785_MMC1_EN, 1);
+
+ /* Setup GPIO 140 - MMC1_CD as input */
+ if (omap_request_gpio(OMAP_PR785_MMC1_CD) < 0) {
+ printk(KERN_ERR "Failed to request MMC IRQ %d \n",
+ OMAP_PR785_MMC1_CD);
+ return -1;
+ }
+ gpio_direction_input(OMAP_PR785_MMC1_CD);
+#endif
+
/* Register the MMC driver */
return platform_driver_register(&omap_mmc_driver);
}
@@ -1231,6 +1280,9 @@ static void __exit omap_mmc_cleanup(void)
{
/* Unregister MMC driver */
platform_driver_unregister(&omap_mmc_driver);
+#if defined(CONFIG_MACH_OMAP3EVM) && defined(CONFIG_PR785)
+ omap_free_gpio(OMAP_PR785_MMC1_CD);
+#endif
}
module_init(omap_mmc_init);
--
1.5.6
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
