From: David Brownell <[EMAIL PROTECTED]>

Declare the two 1Kbit EEPROMs included in the H4 board stack.
One is on the CPU card; the other is on the mainboard.

Signed-off-by: David Brownell <[EMAIL PROTECTED]>
Signed-off-by: Tony Lindgren <[EMAIL PROTECTED]>
---
 arch/arm/mach-omap2/board-h4.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 2fef2c8..7de0506 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -19,6 +19,7 @@
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/i2c.h>
+#include <linux/i2c/at24.h>
 #include <linux/input.h>
 #include <linux/err.h>
 #include <linux/clk.h>
@@ -392,11 +393,24 @@ static struct omap_board_config_kernel h4_config[] = {
        { OMAP_TAG_LCD,         &h4_lcd_config },
 };
 
+static struct at24_platform_data m24c01 = {
+       .byte_len       = SZ_1K / 8,
+       .page_size      = 16,
+};
+
 static struct i2c_board_info __initdata h4_i2c_board_info[] = {
        {
                I2C_BOARD_INFO("isp1301_omap", 0x2d),
                .irq            = OMAP_GPIO_IRQ(125),
        },
+       {       /* EEPROM on mainboard */
+               I2C_BOARD_INFO("24c01", 0x52),
+               .platform_data  = &m24c01,
+       },
+       {       /* EEPROM on cpu card */
+               I2C_BOARD_INFO("24c01", 0x57),
+               .platform_data  = &m24c01,
+       },
 };
 
 static void __init omap_h4_init(void)

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to