Resending this patch after fixing comments received.
CONFIG_OMAP3EVM_PR785 has been moved to arch/arm/mach-omap2/Kconfig
MUX patch has been separated and sent out separately
regulator/core.c changes have been separated and send out earlier
Platform driver has been removed
Renamed supplies to vdd1 and vdd2
regulator_get_drvdata() is being used to get driver data
Signed-off-by: Manikandan Pillai <[EMAIL PROTECTED]>
---
arch/arm/mach-omap2/Kconfig | 32 ++
arch/arm/mach-omap2/board-omap3evm.c | 23 ++-
arch/arm/mach-omap2/mmc-twl4030.c | 5 +-
drivers/mfd/Kconfig | 14 -
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/tps6235x-regulator.c | 557 ++++++++++++++++++++++++++++++++
drivers/video/omap/lcd_omap3evm.c | 4 +
8 files changed, 627 insertions(+), 17 deletions(-)
create mode 100644 drivers/regulator/tps6235x-regulator.c
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index ca24a7a..c1fb1db 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -121,6 +121,38 @@ config MACH_OMAP3EVM
bool "OMAP 3530 EVM board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+choice
+ prompt "Power board for OMAP3 EVM"
+ depends on MACH_OMAP3EVM=y
+ help
+ Select the power module available on your OMAP3 EVM.
+
+config TWL4030_CORE
+ bool "TI TWL4030/TPS659x0 Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ help
+ Say yes here if you have TWL4030 family chip on your board.
+ This core driver provides register access and IRQ handling
+ facilities, and registers devices for the various functions
+ so that function-specific drivers can bind to them.
+
+ These multi-function chips are found on many OMAP2 and OMAP3
+ boards, providing power management, RTC, GPIO, keypad, a
+ high speed USB OTG transceiver, an audio codec (on most
+ versions) and many other features.
+
+config OMAP3EVM_PR785
+ bool "TI TPS6235X based Power Module"
+ depends on I2C=y && (ARCH_OMAP3)
+ default n
+ help
+ Say yes here if you are using the TPS6235x based PR785 Power Module
+ for the EVM boards. This core driver provides register access and IRQ
+ handling facilities, and registers devices for the various functions
+ so that function-specific drivers can bind to them.
+
+endchoice
+
config MACH_OMAP3_BEAGLE
bool "OMAP3 BEAGLE board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
diff --git a/arch/arm/mach-omap2/board-omap3evm.c
b/arch/arm/mach-omap2/board-omap3evm.c
index 8a1b86e..d0d6a91 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -41,7 +41,7 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "twl4030-generic-scripts.h"
#include "mmc-twl4030.h"
-
+#include <linux/regulator/machine.h>
static struct resource omap3evm_smc911x_resources[] = {
[0] = {
@@ -90,6 +90,7 @@ static struct omap_uart_config omap3_evm_uart_config
__initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+#if defined(CONFIG_TWL4030_CORE)
static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
@@ -151,11 +152,31 @@ static struct i2c_board_info __initdata
omap3evm_i2c_boardinfo[] = {
.platform_data = &omap3evm_twldata,
},
};
+#endif
+
+#if defined(CONFIG_OMAP3EVM_PR785)
+static struct i2c_board_info __initdata tps_6235x_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("tps62352", 0x4A),
+ .flags = I2C_CLIENT_WAKE,
+ },
+ {
+ I2C_BOARD_INFO("tps62353", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ },
+};
+#endif
static int __init omap3_evm_i2c_init(void)
{
+#if defined(CONFIG_OMAP3EVM_PR785)
+ omap_register_i2c_bus(1, 2600, tps_6235x_i2c_board_info,
+ ARRAY_SIZE(tps_6235x_i2c_board_info));
+#endif
+#if defined(CONFIG_TWL4030_CORE)
omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
ARRAY_SIZE(omap3evm_i2c_boardinfo));
+#endif
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c
b/arch/arm/mach-omap2/mmc-twl4030.c
index 626d668..daf10f3 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -167,7 +167,7 @@ static int twl_mmc_resume(struct device *dev, int slot)
*/
static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
{
- int ret;
+ int ret = 0;
u8 vmmc, dev_grp_val;
switch (1 << vdd) {
@@ -222,6 +222,7 @@ static int twl_mmc_set_voltage(struct twl_mmc_controller
*c, int vdd)
else
dev_grp_val = LDO_CLR; /* Power down */
+#if defined(CONFIG_TWL4030_CORE)
ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
dev_grp_val, c->twl_vmmc_dev_grp);
if (ret)
@@ -229,7 +230,7 @@ static int twl_mmc_set_voltage(struct twl_mmc_controller
*c, int vdd)
ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
vmmc, c->twl_mmc_dedicated);
-
+#endif
return ret;
}
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 650b51c..ff5fbd5 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -61,20 +61,6 @@ config UCB1400_CORE
To compile this driver as a module, choose M here: the
module will be called ucb1400_core.
-config TWL4030_CORE
- bool "Texas Instruments TWL4030/TPS659x0 Support"
- depends on I2C=y && GENERIC_HARDIRQS
- help
- Say yes here if you have TWL4030 family chip on your board.
- This core driver provides register access and IRQ handling
- facilities, and registers devices for the various functions
- so that function-specific drivers can bind to them.
-
- These multi-function chips are found on many OMAP2 and OMAP3
- boards, providing power management, RTC, GPIO, keypad, a
- high speed USB OTG transceiver, an audio codec (on most
- versions) and many other features.
-
config TWL4030_POWER
bool "Support power sequencing scripts on TWL4030/TPS659x0"
depends on TWL4030_CORE
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 0765389..514b166 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -80,4 +80,12 @@ config REGULATOR_DA903X
Say y here to support the BUCKs and LDOs regulators found on
Dialog Semiconductor DA9030/DA9034 PMIC.
+config REGULATOR_TPS6235X
+ bool "TPS6235X Power regulator for OMAP3EVM"
+ depends on I2C=y
+ help
+ This driver supports the voltage regulators provided by TPS6235x
chips.
+ The TPS62352 and TPS62353 are mounted on PR785 Power module card for
+ providing voltage regulator functions.
+
endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 0dacb18..fdc5f5b 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -12,5 +12,6 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
+obj-$(CONFIG_REGULATOR_TPS6235X)+= tps6235x-regulator.o
ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/tps6235x-regulator.c
b/drivers/regulator/tps6235x-regulator.c
new file mode 100644
index 0000000..26ddb78
--- /dev/null
+++ b/drivers/regulator/tps6235x-regulator.c
@@ -0,0 +1,557 @@
+/*
+ * tps6235x-regulator.c -- support regulators in tps6235x family chips
+ *
+ * Copyright (C) 2008 David Brownell
+ * Author : Manikandan Pillai<[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+
+/* Minimum and Maximum dc-dc voltage supported by the TPS6235x devices
+All voltages given in millivolts */
+#define PR785_MIN_CORE_VOLT 750
+#define PR785_MAX_CORE_VOLT 1537
+#define PR785_MIN_MPU_VOLT 750
+#define PR785_MAX_MPU_VOLT 1537
+
+/* Maximum number of bytes to be read in a single read */
+#define PR785_RETRY_COUNT 0x3
+
+/* Register bit settings */
+#define TPS6235X_EN_DCDC (0x1 << 0x7)
+#define TPS6235X_VSM_MSK (0x3F)
+#define TPS6235X_EN_SYN_MSK (0x1 << 0x5)
+#define TPS6235X_SW_VOLT_MSK (0x1 << 0x4)
+#define TPS6235X_PWR_OK_MSK (0x1 << 0x5)
+#define TPS6235X_OUT_DIS_MSK (0x1 << 0x6)
+#define TPS6235X_GO_MSK (0x1 << 0x7)
+
+/*
+ * These chips are often used in OMAP-based systems.
+ *
+ * This driver implements software-based resource control for various
+ * voltage regulators. This is usually augmented with state machine
+ * based control.
+ */
+struct tps_6235x_info {
+ unsigned int state;
+ unsigned int tps_i2c_addr;
+ struct i2c_client *client;
+ struct device *i2c_dev;
+ /* platform data holder */
+ void *pdata;
+};
+
+static struct tps_6235x_info tps_6235x_infodata[2];
+
+
+#ifndef REGULATOR_MODE_OFF
+#define REGULATOR_MODE_OFF 0
+#endif
+
+
+/* LDO control registers ... offset is from the base of its register bank.
+ * The first three registers of all power resource banks help hardware to
+ * manage the various resource groups.
+ */
+
+#define TPS6235X_REG_VSEL0 0
+#define TPS6235X_REG_VSEL1 1
+#define TPS6235X_REG_CTRL1 2
+#define TPS6235X_REG_CTRL2 3
+#define TPS6235X_REG_MAX TPS6235X_REG_CTRL2
+
+#define MODULE_NAME "tps6235x_power"
+
+/* Debug functions */
+#ifdef DEBUG
+
+#define dump_reg(client, reg, val) \
+ do { \
+ tps6235x_read_reg(client, reg, &val); \
+ dev_dbg(&(client)->dev, "Reg(0x%.2X): 0x%.2X\n", reg, val); \
+ } while (0)
+
+#endif /* #ifdef DEBUG */
+
+/* Device addresses for PR785 card */
+#define PR785_62352_CORE_ADDR 0x4A
+#define PR785_62353_MPU_ADDR 0x48
+
+/* Minimum and Maximum dc-dc voltage supported by the TPS6235x devices
+All voltages given in millivolts */
+#define PR785_MIN_CORE_VOLT 750
+#define PR785_MAX_CORE_VOLT 1537
+#define PR785_MIN_MPU_VOLT 750
+#define PR785_MAX_MPU_VOLT 1537
+
+/* Maximum number of bytes to be read in a single read */
+#define PR785_RETRY_COUNT 0x3
+
+/* Register bit settings */
+#define TPS6235X_EN_DCDC (0x1 << 0x7)
+#define TPS6235X_VSM_MSK (0x3F)
+#define TPS6235X_EN_SYN_MSK (0x1 << 0x5)
+#define TPS6235X_SW_VOLT_MSK (0x1 << 0x4)
+#define TPS6235X_PWR_OK_MSK (0x1 << 0x5)
+#define TPS6235X_OUT_DIS_MSK (0x1 << 0x6)
+#define TPS6235X_GO_MSK (0x1 << 0x7)
+
+/*
+ * Get client pointer for a particular device
+ * Returns zero if successful, or non-zero otherwise.
+ */
+static struct i2c_client *tps_6235x_get_client(unsigned char tps_i2c_addr)
+{
+ if (tps_i2c_addr == PR785_62352_CORE_ADDR)
+ return tps_6235x_infodata[0].client;
+ else if (tps_i2c_addr == PR785_62353_MPU_ADDR)
+ return tps_6235x_infodata[1].client;
+ else
+ return NULL;
+}
+
+/*
+ * Read a value from a register in an tps_6235x device.
+ * The value is returned in 'val'.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+static int tps_6235x_read_reg(struct i2c_client *client, u8 reg, u8 *val)
+{
+ u8 data;
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ data = i2c_smbus_read_byte_data(client, reg);
+ *val = data;
+ return 0;
+}
+
+/*
+ * Write a value to a register in an tps_6235x device.
+ * Returns zero if successful, or non-zero otherwise.
+ */
+static int tps_6235x_write_reg(struct i2c_client *client, u8 reg, u8 val)
+{
+ int err;
+ int retry = 0;
+
+ if (!client->adapter)
+ return -ENODEV;
+
+again:
+ err = i2c_smbus_write_byte_data(client, reg, val);
+ if (err >= 0)
+ return 0;
+
+ dev_err(&client->dev,
+ "wrote 0x%.2x to offset 0x%.2x error %d\n", val, reg, err);
+
+ if (retry <= PR785_RETRY_COUNT) {
+ dev_info(&client->dev, "retry ... %d\n", retry);
+ retry++;
+ schedule_timeout(msecs_to_jiffies(20));
+ goto again;
+ }
+ return err;
+}
+
+
+/**
+* pwr_i2c_read - Allows the caller to read one register from TPS device
+* based on the address given. For the PR785 it reads
+* only 1 byte into a specified register
+* tps_mod_type - Enum for the device to be read
+* reg - Register to be read from(value has to be between 0-3
+* val - value read from the reg
+* Retval - 0 -> Success else non-zero
+**/
+int pwr_i2c_read(unsigned char tps_mod_type, u8 reg, u8 *val)
+{
+ struct i2c_client *client;
+
+ client = tps_6235x_get_client(tps_mod_type);
+ /* check if register is less than <= 3 Register is 0 -3 */
+ if (reg > TPS6235X_REG_MAX)
+ return -1;
+
+ return tps_6235x_read_reg(client, reg, val);
+}
+EXPORT_SYMBOL(pwr_i2c_read);
+
+/**
+* pwr_i2c_write - Allows the caller to write one register from TPS device
+* based on the address given. For the PR785 it writes
+* only 1 byte into a specified register
+* tps_mod_type - Enum for the device to be written
+* reg - Register to be written to(value has to be between 0-3
+* val - value to be written to reg
+* Retval - 0 -> Success else non-zero
+**/
+int pwr_i2c_write(unsigned char tps_mod_type, u8 reg, u8 val)
+{
+ struct i2c_client *client;
+
+ client = tps_6235x_get_client(tps_mod_type);
+
+ /* check if register is less than <= 3 Register is 0 -3 */
+ if (reg > TPS6235X_REG_MAX)
+ return -1;
+
+ return tps_6235x_write_reg(client, reg, val);
+}
+EXPORT_SYMBOL(pwr_i2c_write);
+
+
+/**
+* TPSPR785 - Specific functions
+* pr785_enbl_dcdc - Allows the caller to enable or disable the TPS6235x device
+* on the PR785 board. The voltage for PR785 is selected by
+* VSEL1 register since VSEL pin is kept high
+*
+* flag - 1 == enable 0 == disable
+* Retval - 0 -> Success else non-zero
+**/
+int pr785_enbl_dcdc(unsigned char tps_mod_type, unsigned int en_flag)
+{
+ unsigned char vsel1;
+ int ret;
+
+ ret = pwr_i2c_read(tps_mod_type, TPS6235X_REG_VSEL1, &vsel1);
+ if (ret == 0) {
+ if (en_flag)
+ vsel1 |= TPS6235X_EN_DCDC;
+ else
+ vsel1 &= ~(TPS6235X_EN_DCDC);
+ ret = pwr_i2c_write(tps_mod_type, TPS6235X_REG_VSEL1, vsel1);
+ }
+ return ret;
+}
+EXPORT_SYMBOL(pr785_enbl_dcdc);
+
+/**
+* TPSPR785 - Specific functions
+* pr785_set_dcdc_volt - Allows the caller to set a particular voltage on
+* for CORE or MPU
+*
+* voltage - voltage to be set in millivolts (75--1537)
+* Retval - 0 -> Success else non-zero
+**/
+int pr785_set_dcdc_volt(unsigned char tps_mod_type, unsigned int millivolts)
+{
+ unsigned char vsel1;
+ unsigned int volt;
+
+ /* check if the millivolts is within range */
+ if ((millivolts < PR785_MIN_CORE_VOLT) ||
+ (millivolts > PR785_MAX_CORE_VOLT))
+ return -1;
+
+ /* Output voltage set is = min_op_volt + ( VSM * 12.5mv) */
+ volt = millivolts - PR785_MIN_CORE_VOLT;
+ volt /= 25;
+ volt *= 2;
+ vsel1 = ((TPS6235X_EN_DCDC) | (volt & TPS6235X_VSM_MSK));
+ return pwr_i2c_write(tps_mod_type, TPS6235X_REG_VSEL1, vsel1);
+}
+EXPORT_SYMBOL(pr785_set_dcdc_volt);
+
+/**
+* TPSPR785 - Specific functions
+* pr785_get_dcdc_volt - Allows the caller to get the set voltage on a
+* particular TPS 6235x device on PR785 card
+*
+* voltage - voltage to be set in millivolts (75--1537)
+* Retval - 0 -> Success else non-zero
+**/
+int pr785_get_dcdc_volt(unsigned char tps_mod_type, unsigned int *millivolts)
+{
+ unsigned char vsel1;
+ unsigned int volt;
+
+ /* Read the VSEL1 register to get VSM */
+ pwr_i2c_read(tps_mod_type, TPS6235X_REG_VSEL1, &vsel1);
+ /* Output voltage set is = min_op_volt + ( VSM * 12.5mv) */
+ /* To cut out floating point operation we will multiply by 25
+ divide by 2 */
+ volt = (((vsel1 & TPS6235X_VSM_MSK) * 25) / 2) + PR785_MIN_CORE_VOLT;
+ *millivolts = volt;
+ return 0;
+}
+EXPORT_SYMBOL(pr785_get_dcdc_volt);
+
+static int tps6235x_dcdc_is_enabled(struct regulator_dev *dev)
+{
+ struct tps_6235x_info *tps_info =
+ (struct tps_6235x_info *)rdev_get_drvdata(dev);
+ return tps_info->state;
+}
+
+static int tps6235x_dcdc_enable(struct regulator_dev *dev)
+{
+ struct tps_6235x_info *tps_info =
+ (struct tps_6235x_info *)rdev_get_drvdata(dev);
+
+ tps_info->state = 1;
+ return pr785_enbl_dcdc(tps_info->tps_i2c_addr, 1);
+}
+
+static int tps6235x_dcdc_disable(struct regulator_dev *dev)
+{
+ struct tps_6235x_info *tps_info =
+ (struct tps_6235x_info *)rdev_get_drvdata(dev);
+
+ tps_info->state = 0;
+ return pr785_enbl_dcdc(tps_info->tps_i2c_addr, 0);
+}
+
+static int tps6235x_dcdc_get_voltage(struct regulator_dev *dev)
+{
+ struct tps_6235x_info *tps_info =
+ (struct tps_6235x_info *)rdev_get_drvdata(dev);
+ unsigned int millivolts;
+
+ pr785_get_dcdc_volt(tps_info->tps_i2c_addr, &millivolts);
+ return millivolts * 1000;
+}
+
+static int tps6235x_dcdc_set_voltage(struct regulator_dev *dev,
+ int min_uV, int max_uV)
+{
+ struct tps_6235x_info *tps_info =
+ (struct tps_6235x_info *)rdev_get_drvdata(dev);
+ unsigned int millivolts = min_uV / 1000;
+
+ return pr785_set_dcdc_volt(tps_info->tps_i2c_addr, millivolts) ;
+}
+
+static struct regulator_ops tps62352_dcdc_ops = {
+ .is_enabled = tps6235x_dcdc_is_enabled,
+ .get_voltage = tps6235x_dcdc_get_voltage,
+ .set_voltage = tps6235x_dcdc_set_voltage,
+};
+
+static struct regulator_ops tps62353_dcdc_ops = {
+ .is_enabled = tps6235x_dcdc_is_enabled,
+ .enable = tps6235x_dcdc_enable,
+ .disable = tps6235x_dcdc_disable,
+ .get_voltage = tps6235x_dcdc_get_voltage,
+ .set_voltage = tps6235x_dcdc_set_voltage,
+};
+
+
+static struct regulator_init_data tps_regulator_data[];
+
+/* CORE voltage regulator */
+static struct regulator_consumer_supply tps62352_core_consumers = {
+ .supply = "vdd2",
+};
+
+/* MPU voltage regulator */
+static struct regulator_consumer_supply tps62352_mpu_consumers = {
+ .supply = "vdd1",
+};
+
+static struct regulator_init_data tps_regulator_data[] = {
+ {
+ .constraints = {
+ .min_uV = 750000,
+ .max_uV = 1537000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &tps62352_core_consumers,
+ },
+ {
+ .constraints = {
+ .min_uV = 750000,
+ .max_uV = 1537000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &tps62352_mpu_consumers,
+ },
+};
+
+static struct regulator_desc regulators[] = {
+ {
+ .name = "tps62352",
+ .id = 2,
+ .ops = &tps62352_dcdc_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+ {
+ .name = "tps62353",
+ .id = 3,
+ .ops = &tps62353_dcdc_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ },
+};
+
+/**
+ * tps_6235x_probe - TPS6235x driver i2c probe handler
+ * @client: i2c driver client device structure
+ *
+ * Register PR785 as an i2c client device driver
+ */
+static struct i2c_driver tps_6235x_i2c_driver;
+
+static
+int tps_6235x_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct tps_6235x_info *info;
+ struct regulator_dev *rdev = NULL;
+ unsigned char reg_val;
+
+ printk(KERN_INFO "tps_6235x_probe:i2c_addr = %x\n", (int)client->addr);
+
+ info = &tps_6235x_infodata[id->driver_data];
+ /* Device probed is TPS62352 CORE pwr chip if driver_data = 0
+ Device probed is TPS62353 MPU pwr chip if driver_data = 1 */
+ tps_6235x_infodata[id->driver_data].client = client;
+ tps_6235x_infodata[id->driver_data].tps_i2c_addr = client->addr;
+ tps_6235x_infodata[id->driver_data].state = 1;
+ tps_6235x_infodata[id->driver_data].i2c_dev = &client->dev;
+
+ if (id->driver_data == 0)
+ tps62352_core_consumers.dev = &client->dev;
+ else
+ tps62352_mpu_consumers.dev = &client->dev;
+
+ tps_6235x_read_reg(client, TPS6235X_REG_CTRL2, ®_val);
+ reg_val |= (TPS6235X_OUT_DIS_MSK | TPS6235X_GO_MSK);
+ tps_6235x_write_reg(client, TPS6235X_REG_CTRL2, reg_val);
+ tps_6235x_read_reg(client, TPS6235X_REG_CTRL2, ®_val);
+
+ if (reg_val & TPS6235X_PWR_OK_MSK)
+ printk(KERN_INFO "Power is OK %x\n", reg_val);
+ else {
+ printk(KERN_ERR "Power not within range = %x\n", reg_val);
+ return -2;
+ }
+
+ /* Initialize platform data for TPS devices */
+ client->dev.platform_data =
+ (void *)&tps_regulator_data[id->driver_data];
+ rdev = regulator_register(®ulators[id->driver_data], &client->dev,
+ info);
+ if (rdev == NULL) {
+ printk(KERN_ERR "ERR in regulator registration\n");
+ return -1;
+ }
+
+ /* Set the regulator platform data for unregistration later on */
+ tps_6235x_infodata[id->driver_data].pdata = (void *)rdev;
+ i2c_set_clientdata(client, &tps_6235x_infodata[id->driver_data]);
+
+ return 0;
+}
+
+/**
+ * tps_6235x_remove - TPS6235x driver i2c remove handler
+ * @client: i2c driver client device structure
+ *
+ * UnregisterPR785 as an i2c client device driver
+ */
+static int __exit tps_6235x_remove(struct i2c_client *client)
+{
+ struct regulator_dev *rdev = NULL;
+ struct tps_6235x_info *info;
+#ifdef DEBUG
+ printk(KERN_INFO "tps_6235x_remove invoked\n");
+#endif
+
+ if (!client->adapter)
+ return -ENODEV; /* our client isn't attached */
+
+ info = (struct tps_6235x_info *)i2c_get_clientdata(client);
+ /* Unregister the regulator */
+ rdev = (struct regulator_dev *)info->pdata;
+ regulator_unregister(rdev);
+ /* clear the client data in i2c */
+ i2c_set_clientdata(client, NULL);
+
+ return 0;
+}
+
+
+static const struct i2c_device_id tps_6235x_id[] = {
+ { "tps62352", 0},
+ { "tps62353", 1},
+ {},
+};
+
+MODULE_DEVICE_TABLE(i2c, tps_6235x_id);
+
+static struct i2c_driver tps_6235x_i2c_driver = {
+ .driver = {
+ .name = MODULE_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = tps_6235x_probe,
+ .remove = __exit_p(tps_6235x_remove),
+ .id_table = tps_6235x_id,
+};
+
+/**
+ * tps_6235x_init
+ *
+ * Module init function
+ */
+static int __init tps_6235x_init(void)
+{
+ int err;
+
+#ifdef DEBUG
+ printk(KERN_INFO "tps_6235x_init invoked\n");
+#endif
+
+ err = i2c_add_driver(&tps_6235x_i2c_driver);
+ if (err) {
+ printk(KERN_ERR "Failed to register " MODULE_NAME ".\n");
+ return err;
+ } else
+ printk(KERN_INFO "I2c driver registered\n");
+
+ return 0;
+}
+
+/**
+ * tps_6235x_cleanup
+ *
+ * Module exit function
+ */
+static void __exit tps_6235x_cleanup(void)
+{
+#ifdef DEBUG
+ printk(KERN_INFO "tps_6235x_cleanup invoked\n");
+#endif
+ i2c_del_driver(&tps_6235x_i2c_driver);
+}
+
+late_initcall(tps_6235x_init);
+module_exit(tps_6235x_cleanup);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("TPS6235x based linux driver");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/video/omap/lcd_omap3evm.c
b/drivers/video/omap/lcd_omap3evm.c
index 1c3d814..6daa68d 100644
--- a/drivers/video/omap/lcd_omap3evm.c
+++ b/drivers/video/omap/lcd_omap3evm.c
@@ -66,9 +66,11 @@ static int omap3evm_panel_init(struct lcd_panel *panel,
gpio_direction_output(LCD_PANEL_LR, 1);
gpio_direction_output(LCD_PANEL_UD, 1);
+#if defined(CONFIG_TWL4030_CORE)
twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN);
twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON);
twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF);
+#endif
bklight_level = 100;
return 0;
@@ -97,12 +99,14 @@ static unsigned long omap3evm_panel_get_caps(struct
lcd_panel *panel)
static int omap3evm_bklight_setlevel(struct lcd_panel *panel,
unsigned int level)
{
+#if defined(CONFIG_TWL4030_CORE)
u8 c;
if ((level >= 0) && (level <= 100)) {
c = (125 * (100 - level)) / 100 + 2;
twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF);
bklight_level = level;
}
+#endif
return 0;
}
--
1.5.6
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
