Jouni Hogander <[EMAIL PROTECTED]> writes:
> This patch makes it possible to change uart sleep timeout. New sysfs
> entry is added (/sys/devices/platform/serial8250.0/sleep_timeout)
>
> Also default timeout is increased to 5 second to make serial console
> more usable.
>
> Original patch was written by Tero Kristo some time ago.
>
> Signed-off-by: Jouni Hogander <[EMAIL PROTECTED]>
Thanks, pulling into PM branch.
Kevin
> ---
> arch/arm/mach-omap2/serial.c | 45 +++++++++++++++++++++++++++++++++++++++--
> 1 files changed, 42 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
> index 7635038..c0a913a 100644
> --- a/arch/arm/mach-omap2/serial.c
> +++ b/arch/arm/mach-omap2/serial.c
> @@ -31,7 +31,7 @@
> #include "pm.h"
> #include "prm-regbits-34xx.h"
>
> -#define DEFAULT_TIMEOUT (2 * HZ)
> +#define DEFAULT_TIMEOUT (5 * HZ)
>
> struct omap_uart_state {
> int num;
> @@ -330,6 +330,8 @@ static irqreturn_t omap_uart_interrupt(int irq, void
> *dev_id)
> return IRQ_NONE;
> }
>
> +static u32 sleep_timeout = DEFAULT_TIMEOUT;
> +
> static void omap_uart_idle_init(struct omap_uart_state *uart)
> {
> u32 v;
> @@ -337,7 +339,7 @@ static void omap_uart_idle_init(struct omap_uart_state
> *uart)
> int ret;
>
> uart->can_sleep = 0;
> - uart->timeout = DEFAULT_TIMEOUT;
> + uart->timeout = sleep_timeout;
> setup_timer(&uart->timer, omap_uart_idle_timer,
> (unsigned long) uart);
> mod_timer(&uart->timer, jiffies + uart->timeout);
> @@ -418,6 +420,34 @@ static void omap_uart_pm(struct uart_port *port,
> break;
> }
> }
> +
> +static ssize_t sleep_timeout_show(struct kobject *kobj,
> + struct kobj_attribute *attr,
> + char *buf)
> +{
> + return sprintf(buf, "%u\n", sleep_timeout / HZ);
> +}
> +
> +static ssize_t sleep_timeout_store(struct kobject *kobj,
> + struct kobj_attribute *attr,
> + const char *buf, size_t n)
> +{
> + struct omap_uart_state *uart;
> + unsigned int value;
> +
> + if (sscanf(buf, "%u", &value) != 1) {
> + printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
> + return -EINVAL;
> + }
> + sleep_timeout = value * HZ;
> + list_for_each_entry(uart, &uart_list, node)
> + uart->timeout = sleep_timeout;
> + return n;
> +}
> +
> +static struct kobj_attribute sleep_timeout_attr =
> + __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
> +
> #else
> static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
> static inline void omap_uart_pm(struct uart_port *port,
> @@ -490,6 +520,15 @@ static struct platform_device serial_device = {
>
> static int __init omap_init(void)
> {
> - return platform_device_register(&serial_device);
> + int ret;
> +
> + ret = platform_device_register(&serial_device);
> +
> +#ifdef CONFIG_PM
> + if (!ret)
> + ret = sysfs_create_file(&serial_device.dev.kobj,
> + &sleep_timeout_attr.attr);
> +#endif
> + return ret;
> }
> arch_initcall(omap_init);
> --
> 1.6.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
