* David Brownell <[email protected]> [081201 13:55]:
> From: David Brownell <[email protected]>
> 
> This contains two bugfixes to the initial twl4030 regulator
> support patch related to USB:
> 
>  (a) always overwrite the old list of consumers ... else
>      the regulators all share the same "usb1v5" name;
>  (b) don't set up the "usbcp" regulator, which turns out
>      to be managed through separate controls, usually ULPI
>      directly from the OTG controller.
> 
> Signed-off-by: David Brownell <[email protected]>
> ---
> NOTE:  the version of this patch going to mainline doesn't
> include the twl4030-regulator.c fragment, since that driver
> has not yet gone to mainline.

Pushing this to l-o tree today.

Tony

> 
>  drivers/mfd/twl4030-core.c            |   11 +----------
>  drivers/regulator/twl4030-regulator.c |    2 +-
>  include/linux/i2c/twl4030.h           |    1 -
>  3 files changed, 2 insertions(+), 12 deletions(-)
> 
> --- a/drivers/mfd/twl4030-core.c
> +++ b/drivers/mfd/twl4030-core.c
> @@ -441,7 +441,7 @@ add_regulator_linked(int num, struct reg
>       if (!pdata)
>               return NULL;
>  
> -     if (consumers && !pdata->consumer_supplies) {
> +     if (consumers) {
>               pdata->consumer_supplies = consumers;
>               pdata->num_consumer_supplies = num_consumers;
>       }
> @@ -564,9 +564,6 @@ add_children(struct twl4030_platform_dat
>               static struct regulator_consumer_supply usb3v1 = {
>                       .supply =       "usb3v1",
>               };
> -             static struct regulator_consumer_supply usbcp = {
> -                     .supply =       "usbcp",
> -             };
>  
>               /* this is a template that gets copied */
>               struct regulator_init_data usb_fixed = {
> @@ -581,7 +578,6 @@ add_children(struct twl4030_platform_dat
>               usb1v5.dev = usb_transceiver;
>               usb1v8.dev = usb_transceiver;
>               usb3v1.dev = usb_transceiver;
> -             usbcp.dev = usb_transceiver;
>  
>               child = add_regulator_linked(TWL4030_REG_VUSB1V5, &usb_fixed,
>                               &usb1v5, 1);
> @@ -597,11 +593,6 @@ add_children(struct twl4030_platform_dat
>                               &usb3v1, 1);
>               if (IS_ERR(child))
>                       return PTR_ERR(child);
> -
> -             child = add_regulator_linked(TWL4030_REG_VUSBCP, &usb_fixed,
> -                             &usbcp, 1);
> -             if (IS_ERR(child))
> -                     return PTR_ERR(child);
>       }
>  
>       /* maybe add LDOs that are omitted on cost-reduced parts */
> --- a/drivers/regulator/twl4030-regulator.c
> +++ b/drivers/regulator/twl4030-regulator.c
> @@ -391,7 +391,7 @@ static struct twlreg_info twl4030_regs[]
>       TWL_FIXED_LDO(VUSB1V5, 0x71, 1500, 17),
>       TWL_FIXED_LDO(VUSB1V8, 0x74, 1800, 18),
>       TWL_FIXED_LDO(VUSB3V1, 0x77, 3100, 19),
> -     TWL_FIXED_LDO(VUSBCP, 0x7a, 4800, 21),
> +     /* VUSBCP is managed *only* by the USB subchip */
>  };
>  
>  static int twl4030reg_probe(struct platform_device *pdev)
> --- a/include/linux/i2c/twl4030.h
> +++ b/include/linux/i2c/twl4030.h
> @@ -417,6 +417,5 @@ int twl4030_sih_setup(int module);
>  #define TWL4030_REG_VUSB1V5  17
>  #define TWL4030_REG_VUSB1V8  18
>  #define TWL4030_REG_VUSB3V1  19
> -#define TWL4030_REG_VUSBCP   20
>  
>  #endif /* End of __TWL4030_H */
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to