On Fri, Nov 28, 2008 at 05:34:57PM -0800, Tony Lindgren wrote:
> From: Paul Walmsley <p...@pwsan.com>
> 
> i2c-omap discriminates only between "revision 1" or "greater than
> revision 1."  A following patch introduces code that must also
> discriminate between rev2.x, rev3.6, and rev3.12 controllers.  Support
> this by storing the full revision data from the I2C_REV register, rather
> than just a single bit.
> 
> The revision definitions may need to be extended for other ES levels
> that aren't currently available here.  rev3.6 is what's present on the
> 2430SDP here (unknown ES revision); rev3.12 is used on the 3430ES2
> here.
> 
> Signed-off-by: Paul Walmsley <p...@pwsan.com>
> Signed-off-by: Tony Lindgren <t...@atomide.com>
> ---
>  drivers/i2c/busses/i2c-omap.c |   25 ++++++++++++++++---------
>  1 files changed, 16 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index 40a1e4b..3ac510d 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -38,6 +38,13 @@
>  #include <linux/clk.h>
>  #include <linux/io.h>
>  
> +/* I2C controller revisions */
> +#define OMAP_I2C_REV_2                       0x20
> +
> +/* I2C controller revisions present on specific hardware */
> +#define OMAP_I2C_REV_ON_2430         0x36
> +#define OMAP_I2C_REV_ON_3430         0x3C
> +
>  /* timeout waiting for the controller to respond */
>  #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
>  
> @@ -139,7 +146,7 @@ struct omap_i2c_dev {
>                                                * fifo_size==0 implies no fifo
>                                                * if set, should be trsh+1
>                                                */
> -     unsigned                rev1:1;
> +     u8                      rev;
>       unsigned                b_hw:1;         /* bad h/w fixes */
>       unsigned                idle:1;
>       u16                     iestate;        /* Saved interrupt register */
> @@ -209,7 +216,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
>  
>       dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
>       omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
> -     if (dev->rev1) {
> +     if (dev->rev < OMAP_I2C_REV_2) {
>               iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
>       } else {
>               omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
> @@ -231,7 +238,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
>       unsigned long timeout;
>       unsigned long internal_clk = 0;
>  
> -     if (!dev->rev1) {
> +     if (dev->rev >= OMAP_I2C_REV_2) {
>               omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, OMAP_I2C_SYSC_SRST);
>               /* For some reason we need to set the EN bit before the
>                * reset done bit gets set. */
> @@ -710,6 +717,7 @@ omap_i2c_probe(struct platform_device *pdev)
>       struct omap_i2c_dev     *dev;
>       struct i2c_adapter      *adap;
>       struct resource         *mem, *irq, *ioarea;
> +     void *isr;

There is a proper definition for the function type in
<linux/interrupt.h>

>       int r;
>       u32 speed = 0;
>  
> @@ -760,8 +768,7 @@ omap_i2c_probe(struct platform_device *pdev)
>  
>       omap_i2c_unidle(dev);
>  
> -     if (cpu_is_omap15xx())
> -             dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20;
> +     dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
>  
>       if (cpu_is_omap2430() || cpu_is_omap34xx()) {
>               u16 s;
> @@ -782,16 +789,16 @@ omap_i2c_probe(struct platform_device *pdev)
>       /* reset ASAP, clearing any IRQs */
>       omap_i2c_init(dev);
>  
> -     r = request_irq(dev->irq, dev->rev1 ? omap_i2c_rev1_isr : omap_i2c_isr,
> -                     0, pdev->name, dev);
> +     isr = (dev->rev < OMAP_I2C_REV_2) ? omap_i2c_rev1_isr : omap_i2c_isr;
> +     r = request_irq(dev->irq, isr, 0, pdev->name, dev);
>  
>       if (r) {
>               dev_err(dev->dev, "failure requesting irq %i\n", dev->irq);
>               goto err_unuse_clocks;
>       }
> -     r = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
> +
>       dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
> -              pdev->id, r >> 4, r & 0xf, dev->speed);
> +              pdev->id, dev->rev >> 4, dev->rev & 0xf, dev->speed);
>  
>       omap_i2c_idle(dev);
>  
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Ben (b...@fluff.org, http://www.fluff.org/)

  'a smiley only costs 4 bytes'
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to