* David Brownell <[email protected]> [090116 00:03]: > On Thursday 15 January 2009, Tony Lindgren wrote: > > I've updated our git tree to v2.6.29-rc1, > > OK, after adding the IRQ patch from Anand, and the appended > USB patch (from before the 2.6.29 merge window), it builds. > > Then when it tries to boot, (a) the HSMMC driver reports > "error -110" then chokes, so no root FS; and then (b) MUSB > misdetects the high speed hub as full speed then chokes, > so no network links either. I'm not thinking (a) relates > to the "can't get debounce clock" message, I saw that on > earlier code that still booted just fine.
Thanks, applied and pushed to l-o tree. > That's on a trusty Beagle config. I don't think I'll be > upgrading anything else just yet... Hmm, that sounds conservative! :) Tony > > - Dave > > > ============= CUT HERE > Subject: drivers/usb/core/hub.c: fix CONFIG_USB_OTG=y build > From: David Brownell <[email protected]> > > Carry out the PM-routine interface change in the USB OTG pathway. This > was omitted from the earlier interface-change patch by mistake. > > Signed-off-by: Alan Stern <[email protected]> > Cc: Greg KH <[email protected]> > Cc: Russell King <[email protected]> > Cc: Felipe Balbi <[email protected]> > Cc: Tony Lindgren <[email protected]> > Signed-off-by: Andrew Morton <[email protected]> > --- > > drivers/usb/core/hub.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff -puN > drivers/usb/core/hub.c~drivers-usb-core-hubc-fix-config_usb_otg=y-build > drivers/usb/core/hub.c > --- a/drivers/usb/core/hub.c~drivers-usb-core-hubc-fix-config_usb_otg=y-build > +++ a/drivers/usb/core/hub.c > @@ -1554,7 +1554,7 @@ static int usb_configure_device_otg(stru > * (Includes HNP test device.) > */ > if (udev->bus->b_hnp_enable || udev->bus->is_b_host) { > - err = usb_port_suspend(udev); > + err = usb_port_suspend(udev, PMSG_SUSPEND); > if (err < 0) > dev_dbg(&udev->dev, "HNP fail, %d\n", err); > } > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
