* David Brownell <[email protected]> [090118 13:57]: > From: David Brownell <[email protected]> > Subject: arch/arm/mach-omap2/board-omap3beagle.c buildfix > > CC arch/arm/mach-omap2/board-omap3beagle.o > arch/arm/mach-omap2/board-omap3beagle.c: In function 'beagle_twl_gpio_setup': > arch/arm/mach-omap2/board-omap3beagle.c:132: error: 'TWL4030_GPIO_MAX' > undeclared (first use in this function) > ... many errors ... > arch/arm/mach-omap2/board-omap3beagle.c:308: error: 'gpio' undeclared (first > use in this function) > make[1]: *** [arch/arm/mach-omap2/board-omap3beagle.o] Error 1
Similar patch (and other compile fixes) is already queued up via omap-fixes branch, should get into the mainline within next few days. Tony > Reported-by: Anand Gadiyar <[email protected]> > Signed-off-by: David Brownell <[email protected]> > --- > Against MAINLINE 2.6.29-rc2 > > arch/arm/mach-omap2/board-omap3beagle.c | 9 +++++---- > 1 file changed, 5 insertions(+), 4 deletions(-) > > --- a/arch/arm/mach-omap2/board-omap3beagle.c > +++ b/arch/arm/mach-omap2/board-omap3beagle.c > @@ -28,6 +28,8 @@ > #include <linux/mtd/partitions.h> > #include <linux/mtd/nand.h> > > +#include <linux/i2c/twl4030.h> > + > #include <mach/hardware.h> > #include <asm/mach-types.h> > #include <asm/mach/arch.h> > @@ -120,6 +122,9 @@ static int beagle_twl_gpio_setup(struct > unsigned gpio, unsigned ngpio) > { > /* gpio + 0 is "mmc0_cd" (input/IRQ) */ > + omap_cfg_reg(AH8_34XX_GPIO29); > + mmc[0].gpio_cd = gpio + 0; > + twl4030_mmc_init(mmc); > > /* REVISIT: need ehci-omap hooks for external VBUS > * power switch and overcurrent detect > @@ -304,10 +309,6 @@ static void __init omap3_beagle_init(voi > omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); > omap_serial_init(); > > - omap_cfg_reg(AH8_34XX_GPIO29); > - mmc[0].gpio_cd = gpio + 0; > - twl4030_mmc_init(mmc); > - > omap_cfg_reg(J25_34XX_GPIO170); > gpio_request(170, "DVI_nPD"); > /* REVISIT leave DVI powered down until it's needed ... */ > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
