>From 2.6.29, smc911x isn't maintained anymore. A new driver, smsc911x, will replace it. so convert omap_ldp to use smsc911x driver.
Signed-off-by: Stanley.Miao <[email protected]> --- arch/arm/configs/omap_ldp_defconfig | 24 ++++++++++++- arch/arm/mach-omap2/board-ldp.c | 49 ++++++++++++++++----------- arch/arm/plat-omap/include/mach/board-ldp.h | 6 +-- 3 files changed, 53 insertions(+), 26 deletions(-) diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig index d88e6d7..64db3b1 100644 --- a/arch/arm/configs/omap_ldp_defconfig +++ b/arch/arm/configs/omap_ldp_defconfig @@ -489,14 +489,34 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set -CONFIG_SMC911X=y +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 6592d58..ea00f1b 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -23,6 +23,7 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/i2c/twl4030.h> +#include <linux/smsc911x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -44,8 +45,6 @@ #include "mmc-twl4030.h" - -#define SDP3430_SMC91X_CS 3 #define CONFIG_DISABLE_HFCLK 1 #define ENABLE_VAUX1_DEDICATED 0x03 @@ -53,10 +52,10 @@ #define TWL4030_MSECURE_GPIO 22 -static struct resource ldp_smc911x_resources[] = { +static struct resource ldp_smsc911x_resources[] = { [0] = { - .start = OMAP34XX_ETHR_START, - .end = OMAP34XX_ETHR_START + SZ_4K, + .start = 0, + .end = 0, .flags = IORESOURCE_MEM, }, [1] = { @@ -66,11 +65,21 @@ static struct resource ldp_smc911x_resources[] = { }, }; -static struct platform_device ldp_smc911x_device = { - .name = "smc911x", +static struct smsc911x_platform_config ldp_smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device ldp_smsc911x_device = { + .name = "smsc911x", .id = -1, - .num_resources = ARRAY_SIZE(ldp_smc911x_resources), - .resource = ldp_smc911x_resources, + .num_resources = ARRAY_SIZE(ldp_smsc911x_resources), + .resource = ldp_smsc911x_resources, + .dev = { + .platform_data = &ldp_smsc911x_config, + }, }; static int ldp_twl4030_keymap[] = { @@ -308,34 +317,34 @@ static struct platform_device ldp_lcd_device = { }; static struct platform_device *ldp_devices[] __initdata = { - &ldp_smc911x_device, + &ldp_smsc911x_device, &ldp_lcd_device, &ldp_gpio_keys_device, }; -static inline void __init ldp_init_smc911x(void) +static inline void __init ldp_init_smsc911x(void) { int eth_cs; unsigned long cs_mem_base; int eth_gpio = 0; - eth_cs = LDP_SMC911X_CS; + eth_cs = LDP_SMSC911X_CS; if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc911x\n"); + printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); return; } - ldp_smc911x_resources[0].start = cs_mem_base + 0x0; - ldp_smc911x_resources[0].end = cs_mem_base + 0xf; + ldp_smsc911x_resources[0].start = cs_mem_base + 0x0; + ldp_smsc911x_resources[0].end = cs_mem_base + 0x100; udelay(100); - eth_gpio = LDP_SMC911X_GPIO; + eth_gpio = LDP_SMSC911X_GPIO; - ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); + ldp_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); - if (gpio_request(eth_gpio, "smc911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", + if (gpio_request(eth_gpio, "smsc911x irq") < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", eth_gpio); return; } @@ -348,7 +357,7 @@ static void __init omap_ldp_init_irq(void) omap2_init_common_hw(NULL); omap_init_irq(); omap_gpio_init(); - ldp_init_smc911x(); + ldp_init_smsc911x(); } static struct omap_uart_config ldp_uart_config __initdata = { diff --git a/arch/arm/plat-omap/include/mach/board-ldp.h b/arch/arm/plat-omap/include/mach/board-ldp.h index f233996..81ac2b8 100644 --- a/arch/arm/plat-omap/include/mach/board-ldp.h +++ b/arch/arm/plat-omap/include/mach/board-ldp.h @@ -32,8 +32,6 @@ extern void twl4030_bci_battery_init(void); #define TWL4030_IRQNUM INT_34XX_SYS_NIRQ -#define LDP_SMC911X_CS 1 -#define LDP_SMC911X_GPIO 152 -#define DEBUG_BASE 0x08000000 -#define OMAP34XX_ETHR_START DEBUG_BASE +#define LDP_SMSC911X_CS 1 +#define LDP_SMSC911X_GPIO 152 #endif /* __ASM_ARCH_OMAP_LDP_H */ -- 1.5.6.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
