Device connected to MMC3 is assumed to be self-powered, so set_power() function is empty. It can't be omited because host driver requires it. Array size for hsmmc[] is specified because hsmmc[2].name is needed for MMC3 name.
Also fix a leak which happens if invalid controller id is passed. Signed-off-by: Grazvydas Ignotas <[email protected]> --- This patch applies on top of David Brownel's recent 2 patches. arch/arm/mach-omap2/board-omap3pandora.c | 6 ++++++ arch/arm/mach-omap2/mmc-twl4030.c | 18 ++++++++++++++++-- 2 files changed, 22 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2637641..6c1e8fe 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -159,6 +159,12 @@ static struct twl4030_hsmmc_info omap3pandora_mmc[] = { .ext_clock = 1, .transceiver = true, }, + { + .mmc = 3, + .wires = 4, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + }, {} /* Terminator */ }; diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index b45135e..3b98948 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -61,7 +61,7 @@ static struct twl_mmc_controller { u8 twl_vmmc_dev_grp; u8 twl_mmc_dedicated; char name[HSMMC_NAME_LEN]; -} hsmmc[] = { +} hsmmc[OMAP34XX_NR_MMC] = { { .twl_vmmc_dev_grp = VMMC1_DEV_GRP, .twl_mmc_dedicated = VMMC1_DEDICATED, @@ -346,6 +346,15 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd return ret; } +static int twl_mmc3_set_power(struct device *dev, int slot, int power_on, int vdd) +{ + /* + * Assume MMC3 has self-powered device connected, for example on-board + * chip with external power source. + */ + return 0; +} + static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata; void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) @@ -413,7 +422,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) /* NOTE: we assume OMAP's MMC1 and MMC2 use * the TWL4030's VMMC1 and VMMC2, respectively; - * and that OMAP's MMC3 isn't used. + * and that MMC3 device has it's own power source. */ switch (c->mmc) { @@ -428,8 +437,13 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers) else mmc->slots[0].ocr_mask = MMC_VDD_165_195; break; + case 3: + mmc->slots[0].set_power = twl_mmc3_set_power; + mmc->slots[0].ocr_mask = MMC_VDD_165_195; + break; default: pr_err("MMC%d configuration not supported!\n", c->mmc); + kfree(mmc); continue; } hsmmc_data[c->mmc - 1] = mmc; -- 1.5.6.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
