Hi, On Sun, 15 Feb 2009 21:35:59 +0200, Jarkko Nikula <[email protected]> wrote: > On Fri, 13 Feb 2009 14:21:00 -0800 > Tony Lindgren <[email protected]> wrote: > >> > Subject needs a "ARM: OMAP: " prefix, otherwise ok from me. >> > >> > Acked-by: Jarkko Nikula <[email protected]> >> >> Sounds like a fix, except I posted a shorter version of the patch that >> should do the trick (untested). Attached here too for reference. >> > Tony's version does not fix the issue since obj-$(CONFIG_I2C_OMAP) below > still tries to compile arch/arm/plat-omap/i2c.c as a module. > > -obj-$(CONFIG_I2C_OMAP) += i2c.o > + > +ifneq ($(CONFIG_I2C_OMAP),) > + obj-$(CONFIG_I2C_OMAP) += i2c.o > +endif > > Problem was that drivers/i2c/busses/i2c-omap.c can be module but > arch/arm/plat-omap/i2c.c cannot since it is for early board > initialization code.
why don't you: -obj-$(CONFIG_I2C_OMAP) += i2c.o +obj-y += i2c.o It's quite possible that we will need i2c anyways in most boards. And for the ones who won't need, it's just a few extra bytes to kernel image. I guess it should be ok to always build i2c utilities. -- Best Regards, Felipe Balbi http://blog.felipebalbi.com [email protected] -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
