Hello,
I've got a new board with a OMAP3530 that's wired to a "ULPI Hi-Speed
USB host and peripheral transceiver" (NXP ISP1505) on UH0-D0-7,
UH0-CLK, UH0-STP, UH0-DIR, UH0-NXT. There is also a mux to switch
from host to device on GPIO_140.
What set of kernel configs should I enable? Here's what I have:
CONFIG_USB_HID=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG=y
CONFIG_USB_MON=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SOC=y
CONFIG_USB_MUSB_OTG=y
CONFIG_USB_GADGET_MUSB_HDRC=y
CONFIG_USB_MUSB_HDRC_HCD=y
CONFIG_USB_INVENTRA_DMA=y
CONFIG_USB_STORAGE=y
CONFIG_USB_TEST=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_OTG_UTILS=y
Any help greatly appreciated.
Rick Bronson
_
| |
/ /__
.----------------------------------------------------------._____/ (___)
| Rick Bronson rick at efn dot org Tel 541-485-7264 | (___)
| Amazonia Computing http://www.efn.org/~rick __ o |_____ (___)
| 5050 Donald Street "Onde esta dinheiro?" _`\<, | \_(___)
| Eugene, OR 97405 -- Gal Costa __( )/( )__ |
`----------------------------------------------------------'
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
