No need to wait before the first read, as the operation is likely
completed already. For timeout 50 milliseconds is an overkill, poll the
register for the duration of 5 milliseconds at maximum.

Also, clear the active flag in case of timeout.

Signed-off-by: Aaro Koskinen <[email protected]>
---
 drivers/i2c/chips/twl4030-madc.c |   28 +++++++++++++++-------------
 1 files changed, 15 insertions(+), 13 deletions(-)

diff --git a/drivers/i2c/chips/twl4030-madc.c b/drivers/i2c/chips/twl4030-madc.c
index 8997381..d3e0a7f 100644
--- a/drivers/i2c/chips/twl4030-madc.c
+++ b/drivers/i2c/chips/twl4030-madc.c
@@ -246,24 +246,28 @@ static inline void twl4030_madc_start_conversion(struct 
twl4030_madc_data *madc,
        }
 }
 
-static void twl4030_madc_wait_conversion_ready_ms(
+static int twl4030_madc_wait_conversion_ready(
                struct twl4030_madc_data *madc,
-               u8 *time, u8 status_reg)
+               unsigned int timeout_ms, u8 status_reg)
 {
-       u8 reg = 0;
+       unsigned long timeout;
 
+       timeout = jiffies + msecs_to_jiffies(timeout_ms);
        do {
-               msleep(1);
-               (*time)--;
+               u8 reg;
+
                reg = twl4030_madc_read(madc, status_reg);
-       } while (((reg & TWL4030_MADC_BUSY) && !(reg & TWL4030_MADC_EOC_SW)) &&
-                 (*time != 0));
+               if (!(reg & TWL4030_MADC_BUSY) && (reg & TWL4030_MADC_EOC_SW))
+                       return 0;
+       } while (!time_after(jiffies, timeout));
+
+       return -EAGAIN;
 }
 
 int twl4030_madc_conversion(struct twl4030_madc_request *req)
 {
        const struct twl4030_madc_conversion_method *method;
-       u8 wait_time, ch_msb, ch_lsb;
+       u8 ch_msb, ch_lsb;
        int ret;
 
        if (unlikely(!req))
@@ -310,12 +314,10 @@ int twl4030_madc_conversion(struct twl4030_madc_request 
*req)
        the_madc->requests[req->method].active = 1;
 
        /* Wait until conversion is ready (ctrl register returns EOC) */
-       wait_time = 50;
-       twl4030_madc_wait_conversion_ready_ms(the_madc,
-                       &wait_time, method->ctrl);
-       if (wait_time == 0) {
+       ret = twl4030_madc_wait_conversion_ready(the_madc, 5, method->ctrl);
+       if (ret) {
                dev_dbg(the_madc->dev, "conversion timeout!\n");
-               ret = -EAGAIN;
+               the_madc->requests[req->method].active = 0;
                goto out;
        }
 
-- 
1.5.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to