* Steve Sakoman <[email protected]> [090201 22:28]: > Gumstix will soon be shipping a variant of their Summit board that > includes an SMSC LAN9221 ethernet interface. This patch provides > support via the smsc911x driver when enabled in kernel config. > > The Overo defconfig is not updated since the LAN9221 is an option > not present on all systems.
Adding this to omap3-upstream and pushing to linux-omap. Tony > Signed-off-by: Steve Sakoman <[email protected]> > --- > arch/arm/mach-omap2/board-overo.c | 62 > +++++++++++++++++++++++++ > arch/arm/plat-omap/include/mach/board-overo.h | 3 + > 2 files changed, 65 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-overo.c > b/arch/arm/mach-omap2/board-overo.c > index 9995ac2..032a2c9 100644 > --- a/arch/arm/mach-omap2/board-overo.c > +++ b/arch/arm/mach-omap2/board-overo.c > @@ -55,6 +55,67 @@ > #define GPMC_CS0_BASE 0x60 > #define GPMC_CS_SIZE 0x30 > > +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) > + > +#include <linux/smsc911x.h> > + > +static struct resource overo_smsc911x_resources[] = { > + { > + .name = "smsc911x-memory", > + .flags = IORESOURCE_MEM, > + }, > + { > + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, > + }, > +}; > + > +static struct smsc911x_platform_config overo_smsc911x_config = { > + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, > + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, > + .flags = SMSC911X_USE_32BIT , > + .phy_interface = PHY_INTERFACE_MODE_MII, > +}; > + > +static struct platform_device overo_smsc911x_device = { > + .name = "smsc911x", > + .id = -1, > + .num_resources = ARRAY_SIZE(overo_smsc911x_resources), > + .resource = &overo_smsc911x_resources, > + .dev = { > + .platform_data = &overo_smsc911x_config, > + }, > +}; > + > +static inline void __init overo_init_smsc911x(void) > +{ > + unsigned long cs_mem_base; > + > + if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) { > + printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n"); > + return; > + } > + > + overo_smsc911x_resources[0].start = cs_mem_base + 0x0; > + overo_smsc911x_resources[0].end = cs_mem_base + 0xff; > + > + if ((gpio_request(OVERO_SMSC911X_GPIO, "SMSC911X IRQ") == 0) && > + (gpio_direction_input(OVERO_SMSC911X_GPIO) == 0)) { > + gpio_export(OVERO_SMSC911X_GPIO, 0); > + } else { > + printk(KERN_ERR "could not obtain gpio for SMSC911X IRQ\n"); > + return; > + } > + > + overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO); > + overo_smsc911x_resources[1].end = 0; > + > + platform_device_register(&overo_smsc911x_device); > +} > + > +#else > +static inline void __init overo_init_smsc911x(void) { return; } > +#endif > + > static struct mtd_partition overo_nand_partitions[] = { > { > .name = "xloader", > @@ -234,6 +295,7 @@ static void __init overo_init(void) > usb_musb_init(); > usb_ehci_init(); > overo_flash_init(); > + overo_init_smsc911x(); > > if ((gpio_request(OVERO_GPIO_W2W_NRESET, > "OVERO_GPIO_W2W_NRESET") == 0) && > diff --git a/arch/arm/plat-omap/include/mach/board-overo.h > b/arch/arm/plat-omap/include/mach/board-overo.h > index 7ecae66..8635171 100644 > --- a/arch/arm/plat-omap/include/mach/board-overo.h > +++ b/arch/arm/plat-omap/include/mach/board-overo.h > @@ -22,5 +22,8 @@ > #define OVERO_GPIO_USBH_CPEN 168 > #define OVERO_GPIO_USBH_NRESET 183 > > +#define OVERO_SMSC911X_CS 5 > +#define OVERO_SMSC911X_GPIO 176 > + > #endif /* ____ASM_ARCH_OVERO_H */ > > -- > 1.5.6.3 > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
