* Steve Sakoman <[email protected]> [090201 22:42]: > An upcoming Overo expansion board includes an ADS7846 touchscreen controller. > > This patch adds support via the ads7846 driver when enabled in the > kernel config.
Adding this also to omap3-upstream and linux-omap. Tony > Signed-off-by: Steve Sakoman <[email protected]> > --- > arch/arm/mach-omap2/board-overo.c | 61 > +++++++++++++++++++++++++ > arch/arm/plat-omap/include/mach/board-overo.h | 1 + > 2 files changed, 62 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-overo.c > b/arch/arm/mach-omap2/board-overo.c > index 032a2c9..2521b21 100644 > --- a/arch/arm/mach-omap2/board-overo.c > +++ b/arch/arm/mach-omap2/board-overo.c > @@ -116,6 +116,66 @@ static inline void __init overo_init_smsc911x(void) > static inline void __init overo_init_smsc911x(void) { return; } > #endif > > +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ > + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) > + > +#include <mach/mcspi.h> > +#include <linux/spi/spi.h> > +#include <linux/spi/ads7846.h> > + > +static struct omap2_mcspi_device_config ads7846_mcspi_config = { > + .turbo_mode = 0, > + .single_channel = 1, /* 0: slave, 1: master */ > +}; > + > + > +static int ads7846_get_pendown_state(void) > +{ > + return !gpio_get_value(OVERO_GPIO_PENDOWN); > +} > + > +static struct ads7846_platform_data ads7846_config = { > + .x_max = 0x0fff, > + .y_max = 0x0fff, > + .x_plate_ohms = 180, > + .pressure_max = 255, > + .debounce_max = 10, > + .debounce_tol = 3, > + .debounce_rep = 1, > + .get_pendown_state = ads7846_get_pendown_state, > + .keep_vref_on = 1, > +}; > + > +static struct spi_board_info overo_spi_board_info[] __initdata = { > + { > + .modalias = "ads7846", > + .bus_num = 1, > + .chip_select = 0, > + .max_speed_hz = 1500000, > + .controller_data = &ads7846_mcspi_config, > + .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), > + .platform_data = &ads7846_config, > + } > +}; > + > +static void __init overo_ads7846_init(void) > +{ > + if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) && > + (gpio_direction_input(OVERO_GPIO_PENDOWN) == 0)) { > + gpio_export(OVERO_GPIO_PENDOWN, 0); > + } else { > + printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n"); > + return; > + } > + > + spi_register_board_info(overo_spi_board_info, > + ARRAY_SIZE(overo_spi_board_info)); > +} > + > +#else > +static inline void __init overo_ads7846_init(void) { return; } > +#endif > + > static struct mtd_partition overo_nand_partitions[] = { > { > .name = "xloader", > @@ -296,6 +356,7 @@ static void __init overo_init(void) > usb_ehci_init(); > overo_flash_init(); > overo_init_smsc911x(); > + overo_ads7846_init(); > > if ((gpio_request(OVERO_GPIO_W2W_NRESET, > "OVERO_GPIO_W2W_NRESET") == 0) && > diff --git a/arch/arm/plat-omap/include/mach/board-overo.h > b/arch/arm/plat-omap/include/mach/board-overo.h > index 8635171..aca717d 100644 > --- a/arch/arm/plat-omap/include/mach/board-overo.h > +++ b/arch/arm/plat-omap/include/mach/board-overo.h > @@ -18,6 +18,7 @@ > > #define OVERO_GPIO_BT_XGATE 15 > #define OVERO_GPIO_W2W_NRESET 16 > +#define OVERO_GPIO_PENDOWN 114 > #define OVERO_GPIO_BT_NRESET 164 > #define OVERO_GPIO_USBH_CPEN 168 > #define OVERO_GPIO_USBH_NRESET 183 > -- > 1.5.6.3 > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
