"Nayak, Rajendra" <rna...@ti.com> writes:
> This patch updates the voltage levels for VDD1 OPP1/2 and
> VDD2 OPP1/2 according to the latest operating condition
> addendum for 3430.
>
> The new voltage levels at various OPP's for VDD1/2 are as below
>
> VDD1 OPP1 0.975v
> VDD1 OPP2 1.050v
> VDD1 OPP3 1.200v
> VDD1 OPP4 1.270v
> VDD1 OPP5 1.350v
>
> VDD2 OPP1 0.975v
> VDD2 OPP2 1.050v
> VDD2 OPP3 1.150v
>
> The patch applies on the latest pm head and is validated on 3430SDP.
>
This didn't apply to latest PM branch due to changes in the regbits
header. I manually fixed this up and applied to PM branch.
Thanks,
Kevin
> Signed-off-by: Rajendra Nayak <rna...@ti.com>
> ---
> arch/arm/mach-omap2/omap3-opp.h | 12 ++++++------
> arch/arm/mach-omap2/prm-regbits-34xx.h | 8 ++++----
> 2 files changed, 10 insertions(+), 10 deletions(-)
>
> Index: linux-omap-2.6/arch/arm/mach-omap2/omap3-opp.h
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/mach-omap2/omap3-opp.h 2009-02-13
> 09:28:45.000000000 +0530
> +++ linux-omap-2.6/arch/arm/mach-omap2/omap3-opp.h 2009-02-13
> 09:37:35.767125634 +0530
> @@ -24,9 +24,9 @@
> static struct omap_opp omap3_mpu_rate_table[] = {
> {0, 0, 0},
> /*OPP1*/
> - {S125M, VDD1_OPP1, 0x18},
> + {S125M, VDD1_OPP1, 0x1E},
> /*OPP2*/
> - {S250M, VDD1_OPP2, 0x20},
> + {S250M, VDD1_OPP2, 0x24},
> /*OPP3*/
> {S500M, VDD1_OPP3, 0x30},
> /*OPP4*/
> @@ -38,9 +38,9 @@ static struct omap_opp omap3_mpu_rate_ta
> static struct omap_opp omap3_l3_rate_table[] = {
> {0, 0, 0},
> /*OPP1*/
> - {0, VDD2_OPP1, 0x18},
> + {0, VDD2_OPP1, 0x1E},
> /*OPP2*/
> - {S83M, VDD2_OPP2, 0x20},
> + {S83M, VDD2_OPP2, 0x24},
> /*OPP3*/
> {S166M, VDD2_OPP3, 0x2C},
> };
> @@ -48,9 +48,9 @@ static struct omap_opp omap3_l3_rate_tab
> static struct omap_opp omap3_dsp_rate_table[] = {
> {0, 0, 0},
> /*OPP1*/
> - {S90M, VDD1_OPP1, 0x18},
> + {S90M, VDD1_OPP1, 0x1E},
> /*OPP2*/
> - {S180M, VDD1_OPP2, 0x20},
> + {S180M, VDD1_OPP2, 0x24},
> /*OPP3*/
> {S360M, VDD1_OPP3, 0x30},
> /*OPP4*/
> Index: linux-omap-2.6/arch/arm/mach-omap2/prm-regbits-34xx.h
> ===================================================================
> --- linux-omap-2.6.orig/arch/arm/mach-omap2/prm-regbits-34xx.h
> 2009-02-13 09:26:16.000000000 +0530
> +++ linux-omap-2.6/arch/arm/mach-omap2/prm-regbits-34xx.h 2009-02-13
> 10:12:07.005364895 +0530
> @@ -464,14 +464,14 @@
>
> /* PRM_VC_CMD_VAL_0 specific bits */
> #define OMAP3430_VC_CMD_VAL0_ON (0x3 << 4)
> -#define OMAP3430_VC_CMD_VAL0_ONLP (0x3 << 3)
> -#define OMAP3430_VC_CMD_VAL0_RET (0x3 << 3)
> +#define OMAP3430_VC_CMD_VAL0_ONLP (0xF << 1)
> +#define OMAP3430_VC_CMD_VAL0_RET (0xF << 1)
> #define OMAP3430_VC_CMD_VAL0_OFF (0x3 << 4)
>
> /* PRM_VC_CMD_VAL_1 specific bits */
> #define OMAP3430_VC_CMD_VAL1_ON (0xB << 2)
> -#define OMAP3430_VC_CMD_VAL1_ONLP (0x3 << 3)
> -#define OMAP3430_VC_CMD_VAL1_RET (0x3 << 3)
> +#define OMAP3430_VC_CMD_VAL1_ONLP (0xF << 1)
> +#define OMAP3430_VC_CMD_VAL1_RET (0xF << 1)
> #define OMAP3430_VC_CMD_VAL1_OFF (0xB << 2)
>
> /* PRM_VC_CH_CONF */--
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
