Add card detect gpio for SD card slot and include dt gpio header.
Signed-off-by: Balaji T K <[email protected]>
---
arch/arm/boot/dts/am4372.dtsi | 1 +
arch/arm/boot/dts/am43x-epos-evm.dts | 9 +++++++++
2 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index c6bd4d9..b75dd40 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -8,6 +8,7 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts
b/arch/arm/boot/dts/am43x-epos-evm.dts
index fbf9c4c..bad4457 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -79,6 +79,12 @@
0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST |
MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0x160 (PIN_INPUT | MUX_MODE7) /*
spi0_cs1.gpio0_6 */
+ >;
+ };
};
matrix_keypad: matrix_keypad@0 {
@@ -119,6 +125,9 @@
status = "okay";
vmmc-supply = <&vmmcsd_fixed>;
bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
};
&mac {
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
