Add pullup for twl4030 GPIO_0 used as MMC1 card detect signal.
Signed-off-by: Dmitry Lifshitz <[email protected]>
---
arch/arm/boot/dts/omap3-cm-t3x30.dtsi | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
index 4bcc639..a56d082 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
@@ -90,4 +90,6 @@
&twl_gpio {
ti,use-leds;
+ /* pullups: BIT(0) */
+ ti,pullups = <0x000001>;
};
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
