On Fri, Feb 21, 2014 at 04:24:21AM +0000, Joel Fernandes wrote:
> Currently, EDMA driver uses of_address_to_resource for getting Channel
> controller and x-bar register resources. Use platform_get_resource_by_name
> instead regardless of whether its DT-boot or not, document the new reg-names
> properties.
Doesn't this break existing DTBs?
>
> Also, while at it get rid of the assumption in the code that "CC" is at reg
> index 0 in the DT and xbar is at offset 1. Instead use reg-names to get the
> memory resource in concern keeping things much cleaner and simpler. This also
> makes it possible to have multiple channel controllers.
While this is nice I think we have to have a fallback to the existing
behaviour if there's no reg-names property present, unless we know for
certain no-one is possibly using an existing DTB.
Cheers,
Mark.
>
> Signed-off-by: Joel Fernandes <jo...@ti.com>
> ---
> Documentation/devicetree/bindings/dma/ti-edma.txt | 7 ++++++
> arch/arm/boot/dts/am33xx.dtsi | 1 +
> arch/arm/boot/dts/am4372.dtsi | 1 +
> arch/arm/common/edma.c | 28
> ++++++++++-----------
> 4 files changed, 22 insertions(+), 15 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt
> b/Documentation/devicetree/bindings/dma/ti-edma.txt
> index 9fbbdb7..176e42b 100644
> --- a/Documentation/devicetree/bindings/dma/ti-edma.txt
> +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
> @@ -8,6 +8,12 @@ Required properties:
> Clients should use a single channel number per DMA request.
> - dma-channels: Specify total DMA channels per CC
> - reg: Memory map for accessing module
> +- reg-names: Since there can be different memory regions, each reg
> + entry should correspond to one of the following reg-names (X being 0 to N):
> + edma_ccX: memory map for Xth Channel Controller
> + edma_tcX: memory map for Xth Transfer Controller
> + Additionally there can be a memory map for xbar (in control module):
> + edma_xbar: memory map for xbar access.
> - interrupt-parent: Interrupt controller the interrupt is routed through
> - interrupts: Exactly 3 interrupts need to be specified in the order:
> 1. Transfer completion interrupt.
> @@ -21,6 +27,7 @@ Example:
>
> edma: edma@49000000 {
> reg = <0x49000000 0x10000>;
> + reg-names = "edma_cc0";
> interrupt-parent = <&intc>;
> interrupts = <12 13 14>;
> compatible = "ti,edma3";
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 2b66e67..55f5723 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -123,6 +123,7 @@
> ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
> reg = <0x49000000 0x10000>,
> <0x44e10f90 0x10>;
> + reg-names = "edma_cc0", "edma_xbar";
> interrupts = <12 13 14>;
> #dma-cells = <1>;
> dma-channels = <64>;
> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
> index babdc84..1323a97 100644
> --- a/arch/arm/boot/dts/am4372.dtsi
> +++ b/arch/arm/boot/dts/am4372.dtsi
> @@ -100,6 +100,7 @@
> ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
> reg = <0x49000000 0x10000>,
> <0x44e10f90 0x10>;
> + reg-names = "edma_cc0", "edma_xbar";
> interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
> index dc95efc..ae0ccae 100644
> --- a/arch/arm/common/edma.c
> +++ b/arch/arm/common/edma.c
> @@ -1458,10 +1458,11 @@ static int edma_xbar_event_map(struct device *dev,
> struct edma_soc_info *pdata, int len)
> {
> int ret, i;
> - struct resource res;
> + struct resource *res;
> void __iomem *xbar;
> const s16 (*xbar_chans)[2];
> u32 shift, offset, mux;
> + struct platform_device *pdev;
>
> xbar_chans = devm_kzalloc(dev,
> len/sizeof(s16) + 2*sizeof(s16),
> @@ -1469,11 +1470,14 @@ static int edma_xbar_event_map(struct device *dev,
> if (!xbar_chans)
> return -ENOMEM;
>
> - ret = of_address_to_resource(node, 1, &res);
> - if (ret)
> + pdev = to_platform_device(dev);
> + res = platform_get_resource_byname(pdev,
> + IORESOURCE_MEM,
> + "edma_xbar");
> + if (!res)
> return -EIO;
>
> - xbar = devm_ioremap(dev, res.start, resource_size(&res));
> + xbar = devm_ioremap(dev, res->start, resource_size(res));
> if (!xbar)
> return -ENOMEM;
>
> @@ -1614,7 +1618,6 @@ static int edma_probe(struct platform_device *pdev)
> int irq[EDMA_MAX_CC] = {0, 0};
> int err_irq[EDMA_MAX_CC] = {0, 0};
> struct resource *r[EDMA_MAX_CC] = {NULL};
> - struct resource res[EDMA_MAX_CC];
> char res_name[10];
> char irq_name[10];
> struct device_node *node = pdev->dev.of_node;
> @@ -1653,16 +1656,11 @@ static int edma_probe(struct platform_device *pdev)
> return -ENODEV;
> break;
> }
> - if (node) {
> - ret = of_address_to_resource(node, j, &res[j]);
> - if (!ret)
> - r[j] = &res[j];
> - } else {
> - sprintf(res_name, "edma_cc%d", j);
> - r[j] = platform_get_resource_byname(pdev,
> - IORESOURCE_MEM,
> - res_name);
> - }
> +
> + sprintf(res_name, "edma_cc%d", j);
> + r[j] = platform_get_resource_byname(pdev,
> + IORESOURCE_MEM,
> + res_name);
> if (!r[j]) {
> if (found)
> break;
> --
> 1.7.9.5
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
