* Felipe Balbi <[email protected]> [090219 13:23]:
> On Sun, Feb 15, 2009 at 03:30:09AM +0200, Felipe Balbi wrote:
> > OMAP_TAGS should vanish soon since they're not generic arm tags.
> > Most of them can be converted to a platform_data or parsed
> > from a command line like e.g. serial tag.
> >
> > For OMAP_TAG_USB we just let boards call omap_usb_init()
> > passing a pointer to omap_usb_config.
> >
> > This patch is compile tested only.
> >
> > Signed-off-by: Felipe Balbi <[email protected]>
>
> Hello, anyone with omap1 board, could you please TEST this ?? Damn, they
> took our 770s, maybe someone at the office still have one, gotta check.
Well I got around trying this applied on mainline kernel on H2.
Still getting "hub 1-0:1.0: unable to enumerate USB device on port 2"
but the result is same as without the patch. So let's apply this.
Tony
> > ---
> > arch/arm/mach-omap1/board-ams-delta.c | 2 +-
> > arch/arm/mach-omap1/board-generic.c | 5 ++---
> > arch/arm/mach-omap1/board-h2.c | 2 +-
> > arch/arm/mach-omap1/board-h3.c | 2 +-
> > arch/arm/mach-omap1/board-innovator.c | 5 ++---
> > arch/arm/mach-omap1/board-nokia770.c | 3 +--
> > arch/arm/mach-omap1/board-osk.c | 2 +-
> > arch/arm/mach-omap1/board-palmte.c | 2 +-
> > arch/arm/mach-omap1/board-palmtt.c | 2 +-
> > arch/arm/mach-omap1/board-palmz71.c | 2 +-
> > arch/arm/mach-omap1/board-sx1.c | 2 +-
> > arch/arm/mach-omap1/board-voiceblue.c | 2 +-
> > arch/arm/mach-omap2/board-apollon.c | 2 +-
> > arch/arm/mach-omap2/board-h4.c | 2 +-
> > arch/arm/plat-omap/include/mach/board.h | 1 -
> > arch/arm/plat-omap/include/mach/usb.h | 2 ++
> > arch/arm/plat-omap/usb.c | 25 ++++---------------------
> > 17 files changed, 22 insertions(+), 41 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap1/board-ams-delta.c
> > b/arch/arm/mach-omap1/board-ams-delta.c
> > index 2e61839..8b40aac 100644
> > --- a/arch/arm/mach-omap1/board-ams-delta.c
> > +++ b/arch/arm/mach-omap1/board-ams-delta.c
> > @@ -175,7 +175,6 @@ static struct omap_usb_config ams_delta_usb_config
> > __initdata = {
> > static struct omap_board_config_kernel ams_delta_config[] = {
> > { OMAP_TAG_LCD, &ams_delta_lcd_config },
> > { OMAP_TAG_UART, &ams_delta_uart_config },
> > - { OMAP_TAG_USB, &ams_delta_usb_config },
> > };
> >
> > static struct resource ams_delta_kp_resources[] = {
> > @@ -232,6 +231,7 @@ static void __init ams_delta_init(void)
> > /* Clear latch2 (NAND, LCD, modem enable) */
> > ams_delta_latch2_write(~0, 0);
> >
> > + omap_usb_init(&ams_delta_usb_config);
> > platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
> > }
> >
> > diff --git a/arch/arm/mach-omap1/board-generic.c
> > b/arch/arm/mach-omap1/board-generic.c
> > index 7d26702..e724940 100644
> > --- a/arch/arm/mach-omap1/board-generic.c
> > +++ b/arch/arm/mach-omap1/board-generic.c
> > @@ -62,7 +62,6 @@ static struct omap_uart_config generic_uart_config
> > __initdata = {
> > };
> >
> > static struct omap_board_config_kernel generic_config[] __initdata = {
> > - { OMAP_TAG_USB, NULL },
> > { OMAP_TAG_UART, &generic_uart_config },
> > };
> >
> > @@ -70,12 +69,12 @@ static void __init omap_generic_init(void)
> > {
> > #ifdef CONFIG_ARCH_OMAP15XX
> > if (cpu_is_omap15xx()) {
> > - generic_config[0].data = &generic1510_usb_config;
> > + omap_usb_init(&generic1510_usb_config);
> > }
> > #endif
> > #if defined(CONFIG_ARCH_OMAP16XX)
> > if (!cpu_is_omap1510()) {
> > - generic_config[0].data = &generic1610_usb_config;
> > + omap_usb_init(&generic1610_usb_config);
> > }
> > #endif
> >
> > diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
> > index 0d784a7..9f3b392 100644
> > --- a/arch/arm/mach-omap1/board-h2.c
> > +++ b/arch/arm/mach-omap1/board-h2.c
> > @@ -364,7 +364,6 @@ static struct omap_lcd_config h2_lcd_config __initdata
> > = {
> > };
> >
> > static struct omap_board_config_kernel h2_config[] __initdata = {
> > - { OMAP_TAG_USB, &h2_usb_config },
> > { OMAP_TAG_UART, &h2_uart_config },
> > { OMAP_TAG_LCD, &h2_lcd_config },
> > };
> > @@ -413,6 +412,7 @@ static void __init h2_init(void)
> > omap_serial_init();
> > omap_register_i2c_bus(1, 100, h2_i2c_board_info,
> > ARRAY_SIZE(h2_i2c_board_info));
> > + omap_usb_init(&h2_usb_config);
> > h2_mmc_init();
> > }
> >
> > diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
> > index bf08b6a..a3c513d 100644
> > --- a/arch/arm/mach-omap1/board-h3.c
> > +++ b/arch/arm/mach-omap1/board-h3.c
> > @@ -418,7 +418,6 @@ static struct omap_lcd_config h3_lcd_config __initdata
> > = {
> > };
> >
> > static struct omap_board_config_kernel h3_config[] __initdata = {
> > - { OMAP_TAG_USB, &h3_usb_config },
> > { OMAP_TAG_UART, &h3_uart_config },
> > { OMAP_TAG_LCD, &h3_lcd_config },
> > };
> > @@ -472,6 +471,7 @@ static void __init h3_init(void)
> > omap_serial_init();
> > omap_register_i2c_bus(1, 100, h3_i2c_board_info,
> > ARRAY_SIZE(h3_i2c_board_info));
> > + omap_usb_init(&h3_usb_config);
> > h3_mmc_init();
> > }
> >
> > diff --git a/arch/arm/mach-omap1/board-innovator.c
> > b/arch/arm/mach-omap1/board-innovator.c
> > index 071cd02..ed7ee07 100644
> > --- a/arch/arm/mach-omap1/board-innovator.c
> > +++ b/arch/arm/mach-omap1/board-innovator.c
> > @@ -370,7 +370,6 @@ static struct omap_uart_config innovator_uart_config
> > __initdata = {
> > };
> >
> > static struct omap_board_config_kernel innovator_config[] = {
> > - { OMAP_TAG_USB, NULL },
> > { OMAP_TAG_LCD, NULL },
> > { OMAP_TAG_UART, &innovator_uart_config },
> > };
> > @@ -392,13 +391,13 @@ static void __init innovator_init(void)
> >
> > #ifdef CONFIG_ARCH_OMAP15XX
> > if (cpu_is_omap1510()) {
> > - innovator_config[0].data = &innovator1510_usb_config;
> > + omap_usb_init(&innovator1510_usb_config);
> > innovator_config[1].data = &innovator1510_lcd_config;
> > }
> > #endif
> > #ifdef CONFIG_ARCH_OMAP16XX
> > if (cpu_is_omap1610()) {
> > - innovator_config[0].data = &h2_usb_config;
> > + omap_usb_init(&h2_usb_config);
> > innovator_config[1].data = &innovator1610_lcd_config;
> > }
> > #endif
> > diff --git a/arch/arm/mach-omap1/board-nokia770.c
> > b/arch/arm/mach-omap1/board-nokia770.c
> > index af51e0b..a495455 100644
> > --- a/arch/arm/mach-omap1/board-nokia770.c
> > +++ b/arch/arm/mach-omap1/board-nokia770.c
> > @@ -371,8 +371,6 @@ static __init int omap_dsp_init(void)
> >
> > static void __init omap_nokia770_init(void)
> > {
> > - nokia770_config[0].data = &nokia770_usb_config;
> > -
> > platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
> > spi_register_board_info(nokia770_spi_board_info,
> > ARRAY_SIZE(nokia770_spi_board_info));
> > @@ -384,6 +382,7 @@ static void __init omap_nokia770_init(void)
> > omap_dsp_init();
> > ads7846_dev_init();
> > mipid_dev_init();
> > + omap_usb_init(&nokia770_usb_config);
> > nokia770_mmc_init();
> > }
> >
> > diff --git a/arch/arm/mach-omap1/board-osk.c
> > b/arch/arm/mach-omap1/board-osk.c
> > index 1a16ecb..99913ac 100644
> > --- a/arch/arm/mach-omap1/board-osk.c
> > +++ b/arch/arm/mach-omap1/board-osk.c
> > @@ -290,7 +290,6 @@ static struct omap_lcd_config osk_lcd_config __initdata
> > = {
> > #endif
> >
> > static struct omap_board_config_kernel osk_config[] __initdata = {
> > - { OMAP_TAG_USB, &osk_usb_config },
> > { OMAP_TAG_UART, &osk_uart_config },
> > #ifdef CONFIG_OMAP_OSK_MISTRAL
> > { OMAP_TAG_LCD, &osk_lcd_config },
> > @@ -510,6 +509,7 @@ static void __init osk_mistral_init(void)
> > i2c_register_board_info(1, mistral_i2c_board_info,
> > ARRAY_SIZE(mistral_i2c_board_info));
> >
> > + omap_usb_init(&osk_usb_config);
> > platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
> > }
> > #else
> > diff --git a/arch/arm/mach-omap1/board-palmte.c
> > b/arch/arm/mach-omap1/board-palmte.c
> > index 99f2b43..b2d3a36 100644
> > --- a/arch/arm/mach-omap1/board-palmte.c
> > +++ b/arch/arm/mach-omap1/board-palmte.c
> > @@ -286,7 +286,6 @@ static void palmte_get_power_status(struct
> > apm_power_info *info, int *battery)
> > #endif
> >
> > static struct omap_board_config_kernel palmte_config[] __initdata = {
> > - { OMAP_TAG_USB, &palmte_usb_config },
> > { OMAP_TAG_LCD, &palmte_lcd_config },
> > { OMAP_TAG_UART, &palmte_uart_config },
> > };
> > @@ -341,6 +340,7 @@ static void __init omap_palmte_init(void)
> > spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
> > palmte_misc_gpio_setup();
> > omap_serial_init();
> > + omap_usb_init(&palmte_usb_config);
> > omap_register_i2c_bus(1, 100, NULL, 0);
> > }
> >
> > diff --git a/arch/arm/mach-omap1/board-palmtt.c
> > b/arch/arm/mach-omap1/board-palmtt.c
> > index 1cbc127..90795bf 100644
> > --- a/arch/arm/mach-omap1/board-palmtt.c
> > +++ b/arch/arm/mach-omap1/board-palmtt.c
> > @@ -272,7 +272,6 @@ static struct omap_uart_config palmtt_uart_config
> > __initdata = {
> > };
> >
> > static struct omap_board_config_kernel palmtt_config[] __initdata = {
> > - { OMAP_TAG_USB, &palmtt_usb_config },
> > { OMAP_TAG_LCD, &palmtt_lcd_config },
> > { OMAP_TAG_UART, &palmtt_uart_config },
> > };
> > @@ -297,6 +296,7 @@ static void __init omap_palmtt_init(void)
> >
> > spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
> > omap_serial_init();
> > + omap_usb_init(&palmtt_usb_config);
> > omap_register_i2c_bus(1, 100, NULL, 0);
> > }
> >
> > diff --git a/arch/arm/mach-omap1/board-palmz71.c
> > b/arch/arm/mach-omap1/board-palmz71.c
> > index baf5efb..89b50e8 100644
> > --- a/arch/arm/mach-omap1/board-palmz71.c
> > +++ b/arch/arm/mach-omap1/board-palmz71.c
> > @@ -239,7 +239,6 @@ static struct omap_uart_config palmz71_uart_config
> > __initdata = {
> > };
> >
> > static struct omap_board_config_kernel palmz71_config[] __initdata = {
> > - {OMAP_TAG_USB, &palmz71_usb_config},
> > {OMAP_TAG_LCD, &palmz71_lcd_config},
> > {OMAP_TAG_UART, &palmz71_uart_config},
> > };
> > @@ -313,6 +312,7 @@ omap_palmz71_init(void)
> >
> > spi_register_board_info(palmz71_boardinfo,
> > ARRAY_SIZE(palmz71_boardinfo));
> > + omap_usb_init(&palmz71_usb_config);
> > omap_serial_init();
> > omap_register_i2c_bus(1, 100, NULL, 0);
> > palmz71_gpio_setup(0);
> > diff --git a/arch/arm/mach-omap1/board-sx1.c
> > b/arch/arm/mach-omap1/board-sx1.c
> > index 28c76a1..7d6f0b7 100644
> > --- a/arch/arm/mach-omap1/board-sx1.c
> > +++ b/arch/arm/mach-omap1/board-sx1.c
> > @@ -373,7 +373,6 @@ static struct omap_uart_config sx1_uart_config
> > __initdata = {
> > };
> >
> > static struct omap_board_config_kernel sx1_config[] __initdata = {
> > - { OMAP_TAG_USB, &sx1_usb_config },
> > { OMAP_TAG_LCD, &sx1_lcd_config },
> > { OMAP_TAG_UART, &sx1_uart_config },
> > };
> > @@ -388,6 +387,7 @@ static void __init omap_sx1_init(void)
> > omap_board_config_size = ARRAY_SIZE(sx1_config);
> > omap_serial_init();
> > omap_register_i2c_bus(1, 100, NULL, 0);
> > + omap_usb_init(&sx1_usb_config);
> > sx1_mmc_init();
> >
> > /* turn on USB power */
> > diff --git a/arch/arm/mach-omap1/board-voiceblue.c
> > b/arch/arm/mach-omap1/board-voiceblue.c
> > index a765354..98275e0 100644
> > --- a/arch/arm/mach-omap1/board-voiceblue.c
> > +++ b/arch/arm/mach-omap1/board-voiceblue.c
> > @@ -145,7 +145,6 @@ static struct omap_uart_config voiceblue_uart_config
> > __initdata = {
> > };
> >
> > static struct omap_board_config_kernel voiceblue_config[] = {
> > - { OMAP_TAG_USB, &voiceblue_usb_config },
> > { OMAP_TAG_UART, &voiceblue_uart_config },
> > };
> >
> > @@ -185,6 +184,7 @@ static void __init voiceblue_init(void)
> > omap_board_config = voiceblue_config;
> > omap_board_config_size = ARRAY_SIZE(voiceblue_config);
> > omap_serial_init();
> > + omap_usb_init(&voiceblue_usb_config);
> > omap_register_i2c_bus(1, 100, NULL, 0);
> >
> > /* There is a good chance board is going up, so enable power LED
> > diff --git a/arch/arm/mach-omap2/board-apollon.c
> > b/arch/arm/mach-omap2/board-apollon.c
> > index 994c947..727d282 100644
> > --- a/arch/arm/mach-omap2/board-apollon.c
> > +++ b/arch/arm/mach-omap2/board-apollon.c
> > @@ -364,7 +364,6 @@ static struct omap_lcd_config apollon_lcd_config
> > __initdata = {
> >
> > static struct omap_board_config_kernel apollon_config[] __initdata = {
> > { OMAP_TAG_UART, &apollon_uart_config },
> > - { OMAP_TAG_USB, &apollon_usb_config },
> > { OMAP_TAG_LCD, &apollon_lcd_config },
> > };
> >
> > @@ -393,6 +392,7 @@ static void __init apollon_usb_init(void)
> > omap_cfg_reg(P21_242X_GPIO12);
> > gpio_request(12, "USB suspend");
> > gpio_direction_output(12, 0);
> > + omap_usb_init(&apollon_usb_config);
> > }
> >
> > static void __init apollon_tsc_init(void)
> > diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
> > index b0252c8..cb5c09b 100644
> > --- a/arch/arm/mach-omap2/board-h4.c
> > +++ b/arch/arm/mach-omap2/board-h4.c
> > @@ -429,7 +429,6 @@ static struct spi_board_info h4_spi_board_info[]
> > __initdata = {
> > static struct omap_board_config_kernel h4_config[] __initdata = {
> > { OMAP_TAG_UART, &h4_uart_config },
> > { OMAP_TAG_LCD, &h4_lcd_config },
> > - { OMAP_TAG_USB, &h4_usb_config },
> > };
> >
> > #ifdef CONFIG_MACH_OMAP_H4_TUSB
> > @@ -748,6 +747,7 @@ static void __init omap_h4_init(void)
> > omap_board_config = h4_config;
> > omap_board_config_size = ARRAY_SIZE(h4_config);
> > omap_serial_init();
> > + omap_usb_init(&h4_usb_config);
> > h4_mmc_init();
> > omap_register_i2c_bus(1, 100, h4_i2c_board_info,
> > ARRAY_SIZE(h4_i2c_board_info));
> > diff --git a/arch/arm/plat-omap/include/mach/board.h
> > b/arch/arm/plat-omap/include/mach/board.h
> > index 3a329f5..ae8c2db 100644
> > --- a/arch/arm/plat-omap/include/mach/board.h
> > +++ b/arch/arm/plat-omap/include/mach/board.h
> > @@ -17,7 +17,6 @@
> > /* Different peripheral ids */
> > #define OMAP_TAG_CLOCK 0x4f01
> > #define OMAP_TAG_SERIAL_CONSOLE 0x4f03
> > -#define OMAP_TAG_USB 0x4f04
> > #define OMAP_TAG_LCD 0x4f05
> > #define OMAP_TAG_GPIO_SWITCH 0x4f06
> > #define OMAP_TAG_UART 0x4f07
> > diff --git a/arch/arm/plat-omap/include/mach/usb.h
> > b/arch/arm/plat-omap/include/mach/usb.h
> > index 47aba6b..64e44c7 100644
> > --- a/arch/arm/plat-omap/include/mach/usb.h
> > +++ b/arch/arm/plat-omap/include/mach/usb.h
> > @@ -21,6 +21,8 @@
> > #define UDC_BASE OMAP1_UDC_BASE
> > #define OMAP_OHCI_BASE OMAP1_OHCI_BASE
> >
> > +void omap_usb_init(struct omap_usb_config *pdata);
> > +
> > #else
> >
> > #define OTG_BASE OMAP2_OTG_BASE
> > diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
> > index e278de6..509f2ed 100644
> > --- a/arch/arm/plat-omap/usb.c
> > +++ b/arch/arm/plat-omap/usb.c
> > @@ -729,30 +729,13 @@ static inline void omap_1510_usb_init(struct
> > omap_usb_config *config) {}
> >
> >
> > /*-------------------------------------------------------------------------*/
> >
> > -static struct omap_usb_config platform_data;
> > -
> > -static int __init
> > -omap_usb_init(void)
> > +void __init omap_usb_init(struct omap_usb_config *pdata)
> > {
> > - const struct omap_usb_config *config;
> > -
> > - config = omap_get_config(OMAP_TAG_USB, struct omap_usb_config);
> > - if (config == NULL) {
> > - printk(KERN_ERR "USB: No board-specific "
> > - "platform config found\n");
> > - return -ENODEV;
> > - }
> > - platform_data = *config;
> > -
> > if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx())
> > - omap_otg_init(&platform_data);
> > + omap_otg_init(pdata);
> > else if (cpu_is_omap15xx())
> > - omap_1510_usb_init(&platform_data);
> > - else {
> > + omap_1510_usb_init(pdata);
> > + else
> > printk(KERN_ERR "USB: No init for your chip yet\n");
> > - return -ENODEV;
> > - }
> > - return 0;
> > }
> >
> > -subsys_initcall(omap_usb_init);
> > --
> > 1.6.1.265.g9a013
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > the body of a message to [email protected]
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
