We've had deeper idle states working on omaps for few years now, but only in the legacy mode. When booted with device tree, the wake-up events did not have a chance to work until commit 3e6cee1786a1 (pinctrl: single: Add support for wake-up interrupts) that recently got merged. In addition to that we also needed commit 79d9701559a9 (of/irq: create interrupts-extended property) that's now also merged.
So let's fix the wake-up events for some selected omaps so devices booted in device tree mode won't just hang if deeper power states are enabled, and so systems can wake up from suspend to the serial port event. Note that there's no longer need to specify the wake-up bit in the pinctrl settings, the request_irq on the wake-up pin takes care of that. Note that there will be new harmless warnings in dmesg output without patch "of/platform: Fix no irq domain found errors when populating interrupts": https://lkml.org/lkml/2014/4/10/620 Cc: [email protected] Cc: "Benoît Cousson" <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Nishanth Menon <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Tero Kristo <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> --- arch/arm/boot/dts/omap3-evm-37xx.dts | 9 +++++++++ arch/arm/boot/dts/omap3-n900.dts | 2 ++ arch/arm/boot/dts/omap3.dtsi | 6 +++--- arch/arm/boot/dts/omap4-panda-common.dtsi | 15 +++++++++++++++ arch/arm/boot/dts/omap4-sdp.dts | 6 ++++++ arch/arm/boot/dts/omap4.dtsi | 6 +++--- include/dt-bindings/pinctrl/omap.h | 12 ++++++++++++ 7 files changed, 50 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 4df68ad..9cba94b 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -89,7 +89,16 @@ status = "disabled"; }; +&uart1 { + interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; +}; + +&uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; +}; + &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 0d34201..c5db0af 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -512,11 +512,13 @@ }; &uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index a5fc83b..f61c76b 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -246,7 +246,7 @@ uart1: serial@4806a000 { compatible = "ti,omap3-uart"; reg = <0x4806a000 0x2000>; - interrupts = <72>; + interrupts-extended = <&intc 72>; dmas = <&sdma 49 &sdma 50>; dma-names = "tx", "rx"; ti,hwmods = "uart1"; @@ -256,7 +256,7 @@ uart2: serial@4806c000 { compatible = "ti,omap3-uart"; reg = <0x4806c000 0x400>; - interrupts = <73>; + interrupts-extended = <&intc 73>; dmas = <&sdma 51 &sdma 52>; dma-names = "tx", "rx"; ti,hwmods = "uart2"; @@ -266,7 +266,7 @@ uart3: serial@49020000 { compatible = "ti,omap3-uart"; reg = <0x49020000 0x400>; - interrupts = <74>; + interrupts-extended = <&intc 74>; dmas = <&sdma 53 &sdma 54>; dma-names = "tx", "rx"; ti,hwmods = "uart3"; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 88c6a05..47bbc59 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -396,6 +396,21 @@ usb-supply = <&vusb>; }; +&uart2 { + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; +}; + +&uart3 { + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; +}; + +&uart4 { + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART4_RX>; +}; + &usb_otg_hs { interface-type = <1>; mode = <3>; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index dbc81fb..e3f3cfb 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -523,16 +523,22 @@ }; &uart2 { + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; &uart3 { + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; &uart4 { + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART4_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index d3f8a6e..24ea9b9 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -288,7 +288,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -296,7 +296,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -304,7 +304,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h index b04528c..404ba7e 100644 --- a/include/dt-bindings/pinctrl/omap.h +++ b/include/dt-bindings/pinctrl/omap.h @@ -69,5 +69,17 @@ #define OMAP5_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0xc840) (val) #define DRA7XX_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x3400) (val) +/* + * Define some commonly used pins configured by the boards. + * Note that some boards use alternative pins, so check + * the schematics before using these. + */ +#define OMAP3_UART1_RX 0x152 +#define OMAP3_UART2_RX 0x14a +#define OMAP3_UART3_RX 0x16e +#define OMAP4_UART2_RX 0xdc +#define OMAP4_UART3_RX 0x104 +#define OMAP4_UART4_RX 0x11c + #endif -- 1.8.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
