On 04/14/2014 02:15 PM, Joachim Eastwood wrote: > On 14 April 2014 15:38, Santosh Shilimkar <[email protected]> wrote: >> On Saturday 12 April 2014 05:06 PM, Joachim Eastwood wrote: >>> Hi, >>> >>> I getting the following error on Linus master right now. >>> >>> [ 2.166320] WARNING: CPU: 0 PID: 0 at drivers/bus/omap_l3_noc.c:113 >>> l3_interrupt_handler+0xf4/0x154() >>> [ 2.166320] L3 custom error: MASTER:MPU TARGET:L4 PER2 >>> [ 2.166320] Modules linked in:
[...] >>> The hardware is a VAR-STK-OM44 dev kit. I got one patch on top of >>> Linus master which is the DT support patch which I posted a couple of >>> hours ago. >>> >> Have you tried removing AES from the build ? Probably worth a >> try. > > Removing the aes driver makes the warning from omap_l3_noc disappear. > > I also tried tried the omap_l3_noc patches from Nishanth Menon that > was just posted but it had the same error when the aes driver was > built-in. Yeah - it better :).. Good to know that driver continues to report bad accesses by drivers to targets that are not active yet. will be great if you could provide a "Tested-by" tag on my series :). Btw, I just finished testing on PandaBoard ES and SDP4430 and I dont see the error that you see on var som. I wonder why? pandaboard-es: Boot PASS: http://slexy.org/raw/s21Hsq97mt sdp4430: Boot PASS: http://slexy.org/raw/s2ZQJUqjrP > > Would it be possible for someone to add hwmod data for the aes driver > to the kernel so that the aes could actually work? Joel, are you planning on posting OMAP4 hwmod data for AES/DES? -- Regards, Nishanth Menon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
