Here's a redo of the patch [1] that effectively does the same thing but is the right way to do things by using ENDPROC instead. The firmware correctly switches to THUMB before entry.
The patch applies ontop of the earlier patch [1]. [1] https://lkml.org/lkml/2014/4/22/1044 Suggested-by: Dave Martin <[email protected]> Cc: Dave Martin <[email protected]> Cc: Santosh Shilimkar <[email protected]> Cc: Russell King <[email protected]> Cc: Nishanth Menon <[email protected]> Cc: Tony Lindgren <[email protected]> Signed-off-by: Joel Fernandes <[email protected]> --- Tony, the earlier patch went into your fixes, and can remain. This patch is just a simple redo of the same and can go in for v3.16, no problem. Thanks. arch/arm/mach-omap2/omap-headsmp.S | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 1809dce..bf36f26 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -31,10 +31,6 @@ * register AuxCoreBoot0. */ ENTRY(omap5_secondary_startup) -.arm -THUMB( adr r9, BSYM(wait) ) @ CPU may be entered in ARM mode. -THUMB( bx r9 ) @ If this is a Thumb-2 kernel, -THUMB( .thumb ) @ switch to Thumb now. wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 ldr r0, [r2] mov r0, r0, lsr #5 @@ -43,7 +39,7 @@ wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 cmp r0, r4 bne wait b secondary_startup -END(omap5_secondary_startup) +ENDPROC(omap5_secondary_startup) /* * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
