On 04/30/2014 02:41 PM, Peter Ujfalusi wrote:
abe_iclk's parent is aess_fclk and not abe_clk.
Also correct the parameters for clock rate calculation as used for OMAP4
since in PRCM level there's no difference between the two platform
regarding to AESS/ABE clocking.
Signed-off-by: Peter Ujfalusi <peter.ujfal...@ti.com>
Acked-by: Tero Kristo <t-kri...@ti.com>
---
arch/arm/boot/dts/omap54xx-clocks.dtsi | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi
b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index d784ff5d3904..86fc507a0567 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -143,10 +143,11 @@
abe_iclk: abe_iclk {
#clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&abe_clk>;
- clock-mult = <1>;
- clock-div = <2>;
+ compatible = "ti,divider-clock";
+ clocks = <&aess_fclk>;
+ ti,bit-shift = <24>;
+ reg = <0x0528>;
+ ti,dividers = <2>, <1>;
};
abe_lp_clk_div: abe_lp_clk_div {
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
