* Joachim Eastwood <manab...@gmail.com> [140501 12:08]: > Hello, > > This patch set adds support for Variscite OM44 series of system on modules > and boards. > > There weren't many comments on v1 of this patch set so I hope this can make > it into 3.16. > Changes since v2: > * Use OMAP IOPAD macros > > Patch 1: Add support for the SoM itself and the reference carrier board. > Together these make the VAR-STK-OM44 dev kit. > Patch 2: Add support for VAR-DVK-OM44 which is just the STK with a LCD > display. > Patch 3: Nodes for WLAN/BT support. > Patch 4: Add quirks so that WLAN can be used. Still waiting for proper DT > bindings. > > Since this patch set now uses the IOPAD macros a fix from Tony is need. > See: https://patchwork.kernel.org/patch/4025421/
Just noted that the macro won't work while was about to apply these, sorry. So we're back to either using the existing OMAP4_WKUP_IOPAD or raw offset from the padconf area unless you have some great macro ideas. > Note that patch 1 relies upon a patch from Tomi Valkeinen add hpd-gpio > (hotplug detect) to the "hdmi-connector". > See: http://marc.info/?l=linux-omap&m=139771947508021&w=2 > > Patch 2 also relies upon a patch from Tomi that adds DT support to panel-dpi. > See: http://marc.info/?l=devicetree&m=139030201815380&w=2 Maybe also leave out the DSS changes until Tomi has confirmed those? Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
