From: Balaji T K <[email protected]> Add nodes for OCP2SCP3 bus, SATA controller and SATA PHY.
[Roger Q] Clean up. Updated IRQ for interrupt crossbar. CC: Benoit Cousson <[email protected]> Signed-off-by: Balaji T K <[email protected]> Signed-off-by: Roger Quadros <[email protected]> --- arch/arm/boot/dts/dra7.dtsi | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index cec826f..1f42e72 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -798,6 +798,45 @@ dma-names = "tx0", "rx0"; status = "disabled"; }; + + omap_control_sata: control-phy@4a002374 { + compatible = "ti,control-phy-pipe3"; + reg = <0x4a002374 0x4>; + reg-names = "power"; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + }; + + /* OCP2SCP3 */ + ocp2scp@4a090000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0x4a090000 0x20>; + ti,hwmods = "ocp2scp3"; + sata_phy: phy@4A096000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x4A096000 0x80>, /* phy_rx */ + <0x4A096400 0x64>, /* phy_tx */ + <0x4A096800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_sata>; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + #phy-cells = <0>; + }; + }; + + sata: sata@4a141100 { + compatible = "snps,dwc-ahci"; + reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&sata_ref_clk>; + ti,hwmods = "sata"; + }; }; crossbar_mpu: crossbar@4a020000 { -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
