ext Sanjeev Premi <[email protected]> writes:

> When 'enable_off_mode' is 0, and (mpu_state < PWRDM_POWER_RET)
> the local variables mpu_state and core_state are modified; but
> the usage count for the original state selected by the governor
> are updated.
>
> This patch updates the 'last_state' in the cpuidle driver to ensure
> that statistics for the correct state are updated.
>
> Signed-off-by: Sanjeev Premi <[email protected]>
> ---
>  arch/arm/mach-omap2/cpuidle34xx.c |   29 +++++++++++++++++++----------
>  1 files changed, 19 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/cpuidle34xx.c 
> b/arch/arm/mach-omap2/cpuidle34xx.c
> index 62fbb2e..b138abd 100644
> --- a/arch/arm/mach-omap2/cpuidle34xx.c
> +++ b/arch/arm/mach-omap2/cpuidle34xx.c
> @@ -76,23 +76,32 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
>  {
>       struct omap3_processor_cx *cx = cpuidle_get_statedata(state);
>       struct timespec ts_preidle, ts_postidle, ts_idle;
> -     u32 mpu_state = cx->mpu_state, core_state = cx->core_state;
> -
> -     current_cx_state = *cx;
> +     u32 mpu_state, core_state;
>  
>       /* Used to keep track of the total time in idle */
>       getnstimeofday(&ts_preidle);
>  
> -     local_irq_disable();
> -     local_fiq_disable();
> -
> +     /*
> +      * Adjust the idle state (if required).
> +      * Also, ensure that usage statistics of correct state are updated.
> +      */
>       if (!enable_off_mode) {
> -             if (mpu_state < PWRDM_POWER_RET)
> -                     mpu_state = PWRDM_POWER_RET;
> -             if (core_state < PWRDM_POWER_RET)
> -                     core_state = PWRDM_POWER_RET;
> +             if (cx->type > OMAP3_STATE_C4) {
> +                     state = &(dev->states[OMAP3_STATE_C4 - 1]);
> +                     dev->last_state = state ;
> +
> +                     cx = cpuidle_get_statedata(state);

There is still C3 where OFF is used for MPU. This needs to be taken
into account.

> +             }
>       }
>  
> +     current_cx_state = *cx;
> +
> +     mpu_state = cx->mpu_state;
> +     core_state = cx->core_state;
> +
> +     local_irq_disable();
> +     local_fiq_disable();
> +
>       pwrdm_set_next_pwrst(mpu_pd, mpu_state);
>       pwrdm_set_next_pwrst(core_pd, core_state);
>  
> -- 
> 1.5.6
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Jouni Högander
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to