Hi Daniel,
On 5/13/2014 6:44 PM, Daniel Mack wrote:
Hi George,
On 05/13/2014 02:57 PM, George Cherian wrote:
I never enabled the MUSB_BABBLE_SW_SESSION_CTRL in the MUSB_BABBLE_CTL reg.
can you try with the following patch.
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 1ae6681..1160cd1 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -477,8 +477,11 @@ static int dsps_musb_init(struct musb *musb)
* logic enabled.
*/
val = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
- if (val == MUSB_BABBLE_RCV_DISABLE)
+ if (val == MUSB_BABBLE_RCV_DISABLE) {
glue->sw_babble_enabled = true;
+ val |= MUSB_BABBLE_SW_SESSION_CTRL;
+ dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
+ }
ret = dsps_musb_dbg_init(musb, glue);
if (ret)
MUSB_BABBLE_STUCK_J still remains unset, so I get the same result as
without the patch: a full glue reset is conducted. Do I get you right
that you expect MUSB_BABBLE_STUCK_J to be set in babble conditions when
MUSB_BABBLE_SW_SESSION_CTRL is set?
Basically, there are 2 types of babble conditions.
1) Transient babble condition - which could be recovered from without an
IP reset .
2) Babble condition - which could be recovered from only by doing an IP
reset.
Looks like you are always hitting case 2 (Most times am also hitting the
same).
Case 1 is really hard to reproduce. I don't have a reliable method as of
now to
reproduce this case consistently.
[ 19.672373] CAUTION: musb: Babble Interrupt Occurred
[ 19.677776] musb_stage0_irq 789: unhandled DISCONNECT transition
(a_wait_bcon)
[ 19.685815] usb 1-1: USB disconnect, device number 3
[ 19.769720] musb-hdrc musb-hdrc.0.auto: babble: MUSB_BABBLE_CTL value 44
[ 19.776765] musb-hdrc musb-hdrc.0.auto: STUCK_J is reset
I don't quite follow, especially as I lack documentation of the IP core.
How do you test babble errors, is there any way to force them to happen
reliably?
There is no 100% reliable method to force it to happen. Following is
my setup ,
I have a HUB with 4 devices connected , which gives me a Babble interrupt
on both connects and disconnects ( Not always though).
Anyway, the full glue layer solves this rare condition quite well for
me. Is there any downside of this?
Daniel
--
-George
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
