N900 now seems to shut down the external oscillator when hitting off-idle. And Beagle XM seems to have OSC_EN pin connected to allow shutting down the oscillator looking at the schematics. The oscillator output is cut off in off-idle and you can monitor it from R56 on the bottom side of the board near the power jack. Note that for beagle we need to also enable the UART wake-up event, the others have that enabled in earlier patches.
OMAP37XX EVM (TMDSEVM3730) does not seem to have twl4030 clken pin connected, so there is no point trying to enable shutting down of the oscillator on it for the extra latency it adds. Signed-off-by: Tony Lindgren <[email protected]> --- arch/arm/boot/dts/omap3-beagle-xm.dts | 6 ++++++ arch/arm/boot/dts/omap3-evm-common.dtsi | 7 +++++++ arch/arm/boot/dts/omap3-n900.dts | 5 +++++ 3 files changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 447e714..b05814b 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -152,6 +152,11 @@ codec { }; }; + + twl_power: power { + compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off"; + ti,use_poweroff; + }; }; }; @@ -211,6 +216,7 @@ }; &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 3007e79..7e44e29 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -45,6 +45,13 @@ #include "twl4030.dtsi" #include "twl4030_omap3.dtsi" +&twl { + twl_power: power { + compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle"; + ti,use_poweroff; + }; +}; + &i2c2 { clock-frequency = <400000>; }; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 869bdd9..09ae615 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -277,6 +277,11 @@ compatible = "ti,twl4030-audio"; ti,enable-vibra = <1>; }; + + twl_power: power { + compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; + ti,use_poweroff; + }; }; &twl_gpio { -- 1.8.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
