On Wed, Jun 4, 2014 at 10:48 AM, Roger Quadros <[email protected]> wrote: > Hi, > > On 06/04/2014 11:25 AM, Yegor Yefremov wrote: >> On Wed, Jun 4, 2014 at 8:40 AM, Sekhar Nori <[email protected]> wrote: >>> On Tuesday 03 June 2014 04:18 PM, Yegor Yefremov wrote: >>>> On Tue, Jun 3, 2014 at 9:57 AM, Yegor Yefremov >>>> <[email protected]> wrote: >>>>> Kernel: 3.14, 3.15 (I haven't tried another kernels) >>>>> >>>>> As soon as I write something to my NAND flash (via cat image > >>>>> /dev/mtdblockx or ubiupdatevol) and make reboot or press a reset >>>>> button, I see only CCCCC and nothing happens before I make a power >>>>> cycle. Any idea? >>>> >>>> Just forgot to mention, that I was actually booting from MMC (mmc1). >>>> The boot sequence is UART0...XIP...MMC0...NAND. > > Can you try to get XIP out of the boot sequence and see if it works? > Maybe try to boot from mmc directly? > > This would prove that NAND/GPMC driver is leaving some state that doesn't > go well with the bootROM XIP.
This configuration is soldered. It won't be easy to change. Yegor -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
