On Mon, Jun 30, 2014 at 10:36:06AM +0100, Mark Rutland wrote:
> On Sun, Jun 29, 2014 at 05:21:43PM +0100, Andre Heider wrote:
> > - /* Power on PRU in case its not done as part of boot-loader */
> > - gdev->pruss_clk = clk_get(dev, "pruss");
> > - if (IS_ERR(gdev->pruss_clk)) {
> > - dev_err(dev, "Failed to get clock\n");
> > - return PTR_ERR(gdev->pruss_clk);
> > + if (dev->of_node) {
> > + match = of_match_device(pruss_of_match_table, dev);
> > + params = match->data;
> > + gdev->pintc_base = params->pintc_offset;
> > } else {
> > + /* Power on PRU in case its not done as part of boot-loader */
> > + gdev->pruss_clk = clk_get(dev, "pruss");
> > + if (IS_ERR(gdev->pruss_clk)) {
> > + dev_err(dev, "Failed to get clock\n");
> > + return PTR_ERR(gdev->pruss_clk);
> > + }
>
> The "pruss" clock was not documented in the binding.
>
> Is the clock really called "pruss", or is it given a specific name in
> the manual?
That hunk was moved, see above. It's not the devicetree path, it's for
non-DT TI DaVinci:
arch/arm/mach-davinci/da850.c:static struct clk pruss_clk = {
arch/arm/mach-davinci/da850.c: .name = "pruss",
The DT path already has a clocks associated at the hwmod level.
>From arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c:
struct omap_hwmod am33xx_pruss_hwmod = {
.name = "pruss",
.class =
&am33xx_pruss_hwmod_class,
.clkdm_name = "pruss_ocp_clkdm",
.flags =
HWMOD_INIT_DEASSERT_HARD_RESET,
.main_clk = "pruss_ocp_gclk",
and doesn't require any additional clock entries as far as the binding is
concerned.
Thanks,
Andre
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
