On 02/07/14 10:45, Tony Lindgren wrote: > * Felipe Balbi <[email protected]> [140701 14:10]: >> Hi, >> >> On Tue, Jul 01, 2014 at 04:00:20PM -0500, Darren Etheridge wrote: >>> Add the necessary nodes to enable the LCD controller and the >>> LCD panel that is attached to the Texas Instruments AM335x >>> EVMSK platform. Also setup the necessary pin mux within the >>> DT file to drive the LCD connector and add the correct >>> pinmux settings for the lcd pins to be configured to when >>> the SoC goes into sleep state for the minimum power >>> consumption. >>> >>> For the sleep mode LCD pin settings, MUX_MODE7 is chosen as >>> this corresponds to switching the pins into input GPIO's with >>> an internal pulldown. Which has been determined to offer the >>> lowest power solution vs leaving the pins configured in LCD >>> mode. >>> >>> Signed-off-by: Darren Etheridge <[email protected]> >>> Acked-by: Wolfram Sang <[email protected]> >> >> Tested-by: Felipe Balbi <[email protected]> >> >> serial console capture: http://slexy.org/view/s200thiMb3 >> >> note that v2 has been pending since May 9th: >> http://marc.info/?l=linux-omap&m=139966159102339&w=2 >> >>> --- >>> Tony, Benoit, >>> >>> I didn't see this patch get applied anywhere, so I updated it and I am >>> resending it. Please let me know if you need any more info before you will >>> apply it. > > Tomi, do you want to ack this one or want to queue the panel .dts > changes into a separate branch?
I don't really have experience with the LCDC used on AM335x SoC (it doesn't have DSS), but the patch looks ok, so for what it's worth: Acked-by: Tomi Valkeinen <[email protected]> I don't have any .dts changes queued, so I think it's better if you pick it up. Tomi
signature.asc
Description: OpenPGP digital signature
