Add DT binding documentation for Silicon Image SiI9022 HDMI encoder.
Signed-off-by: Tomi Valkeinen <[email protected]>
Cc: [email protected]
---
.../devicetree/bindings/video/sil,sii9022.txt | 53 ++++++++++++++++++++++
1 file changed, 53 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/sil,sii9022.txt
diff --git a/Documentation/devicetree/bindings/video/sil,sii9022.txt
b/Documentation/devicetree/bindings/video/sil,sii9022.txt
new file mode 100644
index 000000000000..0cd926636998
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/sil,sii9022.txt
@@ -0,0 +1,53 @@
+Silicon Image SiI9022 HDMI Encoder
+==================================
+
+Silicon Image SiI9022 is an HDMI encoder that encodes parallel RGB
+signal to HDMI signal. The SiI9022 is controlled with i2c command, and
+it has a single reset pin and single interrupt pin.
+
+Required properties:
+- compatible: "sil,sii9022"
+
+Optional properties:
+- reset-gpio: reset gpio
+- interrupts: interrupt line
+
+Required nodes:
+- Video port 0 for parallel video input
+- Video port 1 for HDMI output
+
+Example
+-------
+
+&i2c2 {
+ sii9022: sii9022@3b {
+ compatible = "sil,sii9022";
+ reg = <0x3b>;
+
+ reset-gpio = <&gpio2 1 GPIO_ACTIVE_LOW>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ sii9022_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ sii9022_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
