Signed-off-by: Marek Belisko <ma...@goldelico.com>
---
Documentation/devicetree/bindings/mmc/mmc.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt
b/Documentation/devicetree/bindings/mmc/mmc.txt
index 431716e..b094bd2 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -21,6 +21,7 @@ Optional properties:
below for the case, when a GPIO is used for the CD line
- wp-inverted: when present, polarity on the WP line is inverted. See the note
below for the case, when a GPIO is used for the WP line
+- reset-gpios: Specify GPIOs which will be hold down when turning power
regulator
- max-frequency: maximum operating clock frequency
- no-1-8-v: when present, denotes that 1.8v card voltage is not supported on
this system, even if the controller claims it is.
@@ -72,6 +73,7 @@ sdhci@ab000000 {
cd-gpios = <&gpio 69 0>;
cd-inverted;
wp-gpios = <&gpio 70 0>;
+ reset-gpios = <&gpio 71 0>;
max-frequency = <50000000>;
keep-power-in-suspend;
enable-sdio-wakeup;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
